Added ModelSim folder (and have to add files into it as to allow for different testbench code)
This commit is contained in:
TroubleElectrical committed
1 parent
2208eb4f16
commit
60e5dae43b
72 files changed
+1049
-320
No files matched your search
@@ -0,0 +1 @@
|
||||
|
||||
@@ -0,0 +1,466 @@
|
||||
; Copyright 1991-2009 Mentor Graphics Corporation
|
||||
;
|
||||
; All Rights Reserved.
|
||||
;
|
||||
; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF
|
||||
; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS.
|
||||
;
|
||||
|
||||
[Library]
|
||||
std = $MODEL_TECH/../std
|
||||
ieee = $MODEL_TECH/../ieee
|
||||
verilog = $MODEL_TECH/../verilog
|
||||
vital2000 = $MODEL_TECH/../vital2000
|
||||
std_developerskit = $MODEL_TECH/../std_developerskit
|
||||
synopsys = $MODEL_TECH/../synopsys
|
||||
modelsim_lib = $MODEL_TECH/../modelsim_lib
|
||||
sv_std = $MODEL_TECH/../sv_std
|
||||
|
||||
; Altera Primitive libraries
|
||||
;
|
||||
; VHDL Section
|
||||
;
|
||||
altera_mf = $MODEL_TECH/../altera/vhdl/altera_mf
|
||||
altera = $MODEL_TECH/../altera/vhdl/altera
|
||||
altera_lnsim = $MODEL_TECH/../altera/vhdl/altera_lnsim
|
||||
lpm = $MODEL_TECH/../altera/vhdl/220model
|
||||
220model = $MODEL_TECH/../altera/vhdl/220model
|
||||
maxii = $MODEL_TECH/../altera/vhdl/maxii
|
||||
maxv = $MODEL_TECH/../altera/vhdl/maxv
|
||||
fiftyfivenm = $MODEL_TECH/../altera/vhdl/fiftyfivenm
|
||||
sgate = $MODEL_TECH/../altera/vhdl/sgate
|
||||
arriaii = $MODEL_TECH/../altera/vhdl/arriaii
|
||||
arriaii_hssi = $MODEL_TECH/../altera/vhdl/arriaii_hssi
|
||||
arriaii_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaii_pcie_hip
|
||||
arriaiigz = $MODEL_TECH/../altera/vhdl/arriaiigz
|
||||
arriaiigz_hssi = $MODEL_TECH/../altera/vhdl/arriaiigz_hssi
|
||||
arriaiigz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaiigz_pcie_hip
|
||||
stratixiv = $MODEL_TECH/../altera/vhdl/stratixiv
|
||||
stratixiv_hssi = $MODEL_TECH/../altera/vhdl/stratixiv_hssi
|
||||
stratixiv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixiv_pcie_hip
|
||||
cycloneiv = $MODEL_TECH/../altera/vhdl/cycloneiv
|
||||
cycloneiv_hssi = $MODEL_TECH/../altera/vhdl/cycloneiv_hssi
|
||||
cycloneiv_pcie_hip = $MODEL_TECH/../altera/vhdl/cycloneiv_pcie_hip
|
||||
cycloneive = $MODEL_TECH/../altera/vhdl/cycloneive
|
||||
stratixv = $MODEL_TECH/../altera/vhdl/stratixv
|
||||
stratixv_hssi = $MODEL_TECH/../altera/vhdl/stratixv_hssi
|
||||
stratixv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixv_pcie_hip
|
||||
arriavgz = $MODEL_TECH/../altera/vhdl/arriavgz
|
||||
arriavgz_hssi = $MODEL_TECH/../altera/vhdl/arriavgz_hssi
|
||||
arriavgz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriavgz_pcie_hip
|
||||
arriav = $MODEL_TECH/../altera/vhdl/arriav
|
||||
cyclonev = $MODEL_TECH/../altera/vhdl/cyclonev
|
||||
twentynm = $MODEL_TECH/../altera/vhdl/twentynm
|
||||
twentynm_hssi = $MODEL_TECH/../altera/vhdl/twentynm_hssi
|
||||
twentynm_hip = $MODEL_TECH/../altera/vhdl/twentynm_hip
|
||||
cyclone10lp = $MODEL_TECH/../altera/vhdl/cyclone10lp
|
||||
;
|
||||
; Verilog Section
|
||||
;
|
||||
altera_mf_ver = $MODEL_TECH/../altera/verilog/altera_mf
|
||||
altera_ver = $MODEL_TECH/../altera/verilog/altera
|
||||
altera_lnsim_ver = $MODEL_TECH/../altera/verilog/altera_lnsim
|
||||
lpm_ver = $MODEL_TECH/../altera/verilog/220model
|
||||
220model_ver = $MODEL_TECH/../altera/verilog/220model
|
||||
maxii_ver = $MODEL_TECH/../altera/verilog/maxii
|
||||
maxv_ver = $MODEL_TECH/../altera/verilog/maxv
|
||||
fiftyfivenm_ver = $MODEL_TECH/../altera/verilog/fiftyfivenm
|
||||
sgate_ver = $MODEL_TECH/../altera/verilog/sgate
|
||||
arriaii_ver = $MODEL_TECH/../altera/verilog/arriaii
|
||||
arriaii_hssi_ver = $MODEL_TECH/../altera/verilog/arriaii_hssi
|
||||
arriaii_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaii_pcie_hip
|
||||
arriaiigz_ver = $MODEL_TECH/../altera/verilog/arriaiigz
|
||||
arriaiigz_hssi_ver = $MODEL_TECH/../altera/verilog/arriaiigz_hssi
|
||||
arriaiigz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaiigz_pcie_hip
|
||||
stratixiv_ver = $MODEL_TECH/../altera/verilog/stratixiv
|
||||
stratixiv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixiv_hssi
|
||||
stratixiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixiv_pcie_hip
|
||||
stratixv_ver = $MODEL_TECH/../altera/verilog/stratixv
|
||||
stratixv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixv_hssi
|
||||
stratixv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixv_pcie_hip
|
||||
arriavgz_ver = $MODEL_TECH/../altera/verilog/arriavgz
|
||||
arriavgz_hssi_ver = $MODEL_TECH/../altera/verilog/arriavgz_hssi
|
||||
arriavgz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriavgz_pcie_hip
|
||||
arriav_ver = $MODEL_TECH/../altera/verilog/arriav
|
||||
arriav_hssi_ver = $MODEL_TECH/../altera/verilog/arriav_hssi
|
||||
arriav_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriav_pcie_hip
|
||||
cyclonev_ver = $MODEL_TECH/../altera/verilog/cyclonev
|
||||
cyclonev_hssi_ver = $MODEL_TECH/../altera/verilog/cyclonev_hssi
|
||||
cyclonev_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cyclonev_pcie_hip
|
||||
cycloneiv_ver = $MODEL_TECH/../altera/verilog/cycloneiv
|
||||
cycloneiv_hssi_ver = $MODEL_TECH/../altera/verilog/cycloneiv_hssi
|
||||
cycloneiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cycloneiv_pcie_hip
|
||||
cycloneive_ver = $MODEL_TECH/../altera/verilog/cycloneive
|
||||
twentynm_ver = $MODEL_TECH/../altera/verilog/twentynm
|
||||
twentynm_hssi_ver = $MODEL_TECH/../altera/verilog/twentynm_hssi
|
||||
twentynm_hip_ver = $MODEL_TECH/../altera/verilog/twentynm_hip
|
||||
cyclone10lp_ver = $MODEL_TECH/../altera/verilog/cyclone10lp
|
||||
|
||||
work = work
|
||||
[vcom]
|
||||
; VHDL93 variable selects language version as the default.
|
||||
; Default is VHDL-2002.
|
||||
; Value of 0 or 1987 for VHDL-1987.
|
||||
; Value of 1 or 1993 for VHDL-1993.
|
||||
; Default or value of 2 or 2002 for VHDL-2002.
|
||||
; Default or value of 3 or 2008 for VHDL-2008.
|
||||
VHDL93 = 2002
|
||||
|
||||
; Show source line containing error. Default is off.
|
||||
; Show_source = 1
|
||||
|
||||
; Turn off unbound-component warnings. Default is on.
|
||||
; Show_Warning1 = 0
|
||||
|
||||
; Turn off process-without-a-wait-statement warnings. Default is on.
|
||||
; Show_Warning2 = 0
|
||||
|
||||
; Turn off null-range warnings. Default is on.
|
||||
; Show_Warning3 = 0
|
||||
|
||||
; Turn off no-space-in-time-literal warnings. Default is on.
|
||||
; Show_Warning4 = 0
|
||||
|
||||
; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.
|
||||
; Show_Warning5 = 0
|
||||
|
||||
; Turn off optimization for IEEE std_logic_1164 package. Default is on.
|
||||
; Optimize_1164 = 0
|
||||
|
||||
; Turn on resolving of ambiguous function overloading in favor of the
|
||||
; "explicit" function declaration (not the one automatically created by
|
||||
; the compiler for each type declaration). Default is off.
|
||||
; The .ini file has Explicit enabled so that std_logic_signed/unsigned
|
||||
; will match the behavior of synthesis tools.
|
||||
Explicit = 1
|
||||
|
||||
; Turn off acceleration of the VITAL packages. Default is to accelerate.
|
||||
; NoVital = 1
|
||||
|
||||
; Turn off VITAL compliance checking. Default is checking on.
|
||||
; NoVitalCheck = 1
|
||||
|
||||
; Ignore VITAL compliance checking errors. Default is to not ignore.
|
||||
; IgnoreVitalErrors = 1
|
||||
|
||||
; Turn off VITAL compliance checking warnings. Default is to show warnings.
|
||||
; Show_VitalChecksWarnings = 0
|
||||
|
||||
; Keep silent about case statement static warnings.
|
||||
; Default is to give a warning.
|
||||
; NoCaseStaticError = 1
|
||||
|
||||
; Keep silent about warnings caused by aggregates that are not locally static.
|
||||
; Default is to give a warning.
|
||||
; NoOthersStaticError = 1
|
||||
|
||||
; Turn off inclusion of debugging info within design units.
|
||||
; Default is to include debugging info.
|
||||
; NoDebug = 1
|
||||
|
||||
; Turn off "Loading..." messages. Default is messages on.
|
||||
; Quiet = 1
|
||||
|
||||
; Turn on some limited synthesis rule compliance checking. Checks only:
|
||||
; -- signals used (read) by a process must be in the sensitivity list
|
||||
; CheckSynthesis = 1
|
||||
|
||||
; Activate optimizations on expressions that do not involve signals,
|
||||
; waits, or function/procedure/task invocations. Default is off.
|
||||
; ScalarOpts = 1
|
||||
|
||||
; Require the user to specify a configuration for all bindings,
|
||||
; and do not generate a compile time default binding for the
|
||||
; component. This will result in an elaboration error of
|
||||
; 'component not bound' if the user fails to do so. Avoids the rare
|
||||
; issue of a false dependency upon the unused default binding.
|
||||
; RequireConfigForAllDefaultBinding = 1
|
||||
|
||||
; Inhibit range checking on subscripts of arrays. Range checking on
|
||||
; scalars defined with subtypes is inhibited by default.
|
||||
; NoIndexCheck = 1
|
||||
|
||||
; Inhibit range checks on all (implicit and explicit) assignments to
|
||||
; scalar objects defined with subtypes.
|
||||
; NoRangeCheck = 1
|
||||
|
||||
[vlog]
|
||||
|
||||
; Turn off inclusion of debugging info within design units.
|
||||
; Default is to include debugging info.
|
||||
; NoDebug = 1
|
||||
|
||||
; Turn off "loading..." messages. Default is messages on.
|
||||
; Quiet = 1
|
||||
|
||||
; Turn on Verilog hazard checking (order-dependent accessing of global vars).
|
||||
; Default is off.
|
||||
; Hazard = 1
|
||||
|
||||
; Turn on converting regular Verilog identifiers to uppercase. Allows case
|
||||
; insensitivity for module names. Default is no conversion.
|
||||
; UpCase = 1
|
||||
|
||||
; Turn on incremental compilation of modules. Default is off.
|
||||
; Incremental = 1
|
||||
|
||||
; Turns on lint-style checking.
|
||||
; Show_Lint = 1
|
||||
|
||||
[vsim]
|
||||
; Simulator resolution
|
||||
; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.
|
||||
Resolution = ps
|
||||
|
||||
; User time unit for run commands
|
||||
; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the
|
||||
; unit specified for Resolution. For example, if Resolution is 100ps,
|
||||
; then UserTimeUnit defaults to ps.
|
||||
; Should generally be set to default.
|
||||
UserTimeUnit = default
|
||||
|
||||
; Default run length
|
||||
RunLength = 100 ps
|
||||
|
||||
; Maximum iterations that can be run without advancing simulation time
|
||||
IterationLimit = 5000
|
||||
|
||||
; Directive to license manager:
|
||||
; vhdl Immediately reserve a VHDL license
|
||||
; vlog Immediately reserve a Verilog license
|
||||
; plus Immediately reserve a VHDL and Verilog license
|
||||
; nomgc Do not look for Mentor Graphics Licenses
|
||||
; nomti Do not look for Model Technology Licenses
|
||||
; noqueue Do not wait in the license queue when a license isn't available
|
||||
; viewsim Try for viewer license but accept simulator license(s) instead
|
||||
; of queuing for viewer license
|
||||
; License = plus
|
||||
|
||||
; Stop the simulator after a VHDL/Verilog assertion message
|
||||
; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal
|
||||
BreakOnAssertion = 3
|
||||
|
||||
; Assertion Message Format
|
||||
; %S - Severity Level
|
||||
; %R - Report Message
|
||||
; %T - Time of assertion
|
||||
; %D - Delta
|
||||
; %I - Instance or Region pathname (if available)
|
||||
; %% - print '%' character
|
||||
; AssertionFormat = "** %S: %R\n Time: %T Iteration: %D%I\n"
|
||||
|
||||
; Assertion File - alternate file for storing VHDL/Verilog assertion messages
|
||||
; AssertFile = assert.log
|
||||
|
||||
; Default radix for all windows and commands...
|
||||
; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned
|
||||
DefaultRadix = symbolic
|
||||
|
||||
; VSIM Startup command
|
||||
; Startup = do startup.do
|
||||
|
||||
; File for saving command transcript
|
||||
TranscriptFile = transcript
|
||||
|
||||
; File for saving command history
|
||||
; CommandHistory = cmdhist.log
|
||||
|
||||
; Specify whether paths in simulator commands should be described
|
||||
; in VHDL or Verilog format.
|
||||
; For VHDL, PathSeparator = /
|
||||
; For Verilog, PathSeparator = .
|
||||
; Must not be the same character as DatasetSeparator.
|
||||
PathSeparator = /
|
||||
|
||||
; Specify the dataset separator for fully rooted contexts.
|
||||
; The default is ':'. For example, sim:/top
|
||||
; Must not be the same character as PathSeparator.
|
||||
DatasetSeparator = :
|
||||
|
||||
; Disable VHDL assertion messages
|
||||
; IgnoreNote = 1
|
||||
; IgnoreWarning = 1
|
||||
; IgnoreError = 1
|
||||
; IgnoreFailure = 1
|
||||
|
||||
; Default force kind. May be freeze, drive, deposit, or default
|
||||
; or in other terms, fixed, wired, or charged.
|
||||
; A value of "default" will use the signal kind to determine the
|
||||
; force kind, drive for resolved signals, freeze for unresolved signals
|
||||
; DefaultForceKind = freeze
|
||||
|
||||
; If zero, open files when elaborated; otherwise, open files on
|
||||
; first read or write. Default is 0.
|
||||
; DelayFileOpen = 1
|
||||
|
||||
; Control VHDL files opened for write.
|
||||
; 0 = Buffered, 1 = Unbuffered
|
||||
UnbufferedOutput = 0
|
||||
|
||||
; Control the number of VHDL files open concurrently.
|
||||
; This number should always be less than the current ulimit
|
||||
; setting for max file descriptors.
|
||||
; 0 = unlimited
|
||||
ConcurrentFileLimit = 40
|
||||
|
||||
; Control the number of hierarchical regions displayed as
|
||||
; part of a signal name shown in the Wave window.
|
||||
; A value of zero tells VSIM to display the full name.
|
||||
; The default is 0.
|
||||
; WaveSignalNameWidth = 0
|
||||
|
||||
; Turn off warnings from the std_logic_arith, std_logic_unsigned
|
||||
; and std_logic_signed packages.
|
||||
; StdArithNoWarnings = 1
|
||||
|
||||
; Turn off warnings from the IEEE numeric_std and numeric_bit packages.
|
||||
; NumericStdNoWarnings = 1
|
||||
|
||||
; Control the format of the (VHDL) FOR generate statement label
|
||||
; for each iteration. Do not quote it.
|
||||
; The format string here must contain the conversion codes %s and %d,
|
||||
; in that order, and no other conversion codes. The %s represents
|
||||
; the generate_label; the %d represents the generate parameter value
|
||||
; at a particular generate iteration (this is the position number if
|
||||
; the generate parameter is of an enumeration type). Embedded whitespace
|
||||
; is allowed (but discouraged); leading and trailing whitespace is ignored.
|
||||
; Application of the format must result in a unique scope name over all
|
||||
; such names in the design so that name lookup can function properly.
|
||||
; GenerateFormat = %s__%d
|
||||
|
||||
; Specify whether checkpoint files should be compressed.
|
||||
; The default is 1 (compressed).
|
||||
; CheckpointCompressMode = 0
|
||||
|
||||
; List of dynamically loaded objects for Verilog PLI applications
|
||||
; Veriuser = veriuser.sl
|
||||
|
||||
; Specify default options for the restart command. Options can be one
|
||||
; or more of: -force -nobreakpoint -nolist -nolog -nowave
|
||||
; DefaultRestartOptions = -force
|
||||
|
||||
; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs
|
||||
; (> 500 megabyte memory footprint). Default is disabled.
|
||||
; Specify number of megabytes to lock.
|
||||
; LockedMemory = 1000
|
||||
|
||||
; Turn on (1) or off (0) WLF file compression.
|
||||
; The default is 1 (compress WLF file).
|
||||
; WLFCompress = 0
|
||||
|
||||
; Specify whether to save all design hierarchy (1) in the WLF file
|
||||
; or only regions containing logged signals (0).
|
||||
; The default is 0 (save only regions with logged signals).
|
||||
; WLFSaveAllRegions = 1
|
||||
|
||||
; WLF file time limit. Limit WLF file by time, as closely as possible,
|
||||
; to the specified amount of simulation time. When the limit is exceeded
|
||||
; the earliest times get truncated from the file.
|
||||
; If both time and size limits are specified the most restrictive is used.
|
||||
; UserTimeUnits are used if time units are not specified.
|
||||
; The default is 0 (no limit). Example: WLFTimeLimit = {100 ms}
|
||||
; WLFTimeLimit = 0
|
||||
|
||||
; WLF file size limit. Limit WLF file size, as closely as possible,
|
||||
; to the specified number of megabytes. If both time and size limits
|
||||
; are specified then the most restrictive is used.
|
||||
; The default is 0 (no limit).
|
||||
; WLFSizeLimit = 1000
|
||||
|
||||
; Specify whether or not a WLF file should be deleted when the
|
||||
; simulation ends. A value of 1 will cause the WLF file to be deleted.
|
||||
; The default is 0 (do not delete WLF file when simulation ends).
|
||||
; WLFDeleteOnQuit = 1
|
||||
|
||||
; Automatic SDF compilation
|
||||
; Disables automatic compilation of SDF files in flows that support it.
|
||||
; Default is on, uncomment to turn off.
|
||||
; NoAutoSDFCompile = 1
|
||||
|
||||
[lmc]
|
||||
|
||||
[msg_system]
|
||||
; Change a message severity or suppress a message.
|
||||
; The format is: <msg directive> = <msg number>[,<msg number>...]
|
||||
; Examples:
|
||||
; note = 3009
|
||||
; warning = 3033
|
||||
; error = 3010,3016
|
||||
; fatal = 3016,3033
|
||||
; suppress = 3009,3016,3043
|
||||
; The command verror <msg number> can be used to get the complete
|
||||
; description of a message.
|
||||
|
||||
; Control transcripting of elaboration/runtime messages.
|
||||
; The default is to have messages appear in the transcript and
|
||||
; recorded in the wlf file (messages that are recorded in the
|
||||
; wlf file can be viewed in the MsgViewer). The other settings
|
||||
; are to send messages only to the transcript or only to the
|
||||
; wlf file. The valid values are
|
||||
; both {default}
|
||||
; tran {transcript only}
|
||||
; wlf {wlf file only}
|
||||
; msgmode = both
|
||||
[Project]
|
||||
** Warning: ; Warning -- Do not edit the project properties directly.
|
||||
; Property names are dynamic in nature and property
|
||||
; values have special syntax. Changing property data directly
|
||||
; can result in a corrupt MPF file. All project properties
|
||||
; can be modified through project window dialogs.
|
||||
Project_Version = 6
|
||||
Project_DefaultLib = work
|
||||
Project_SortMethod = unused
|
||||
Project_Files_Count = 2
|
||||
Project_File_0 = /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu.sv
|
||||
Project_File_P_0 = cover_toggle 0 file_type systemverilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat SV vlog_nodebug 0 folder {Top Level} last_compile 1788845636 cover_fsm 0 cover_branch 0 vlog_noload 0 cover_excludedefault 0 vlog_enable0In 0 vlog_disableopt 0 cover_covercells 0 voptflow 1 vlog_showsource 0 vlog_hazard 0 cover_optlevel 3 toggle - vlog_0InOptions {} ood 0 cover_noshort 0 vlog_upper 0 compile_to work vlog_options {} compile_order 0 cover_expr 0 dont_compile 0 cover_stmt 0
|
||||
Project_File_1 = /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv
|
||||
Project_File_P_1 = cover_toggle 0 file_type systemverilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat SV vlog_nodebug 0 folder {Top Level} last_compile 1788848626 cover_fsm 0 cover_branch 0 vlog_noload 0 cover_excludedefault 0 vlog_enable0In 0 vlog_disableopt 0 cover_covercells 0 voptflow 1 vlog_showsource 0 vlog_hazard 0 cover_optlevel 3 toggle - vlog_0InOptions {} ood 0 cover_noshort 0 vlog_upper 0 compile_to work vlog_options {} compile_order 1 cover_expr 0 dont_compile 0 cover_stmt 0
|
||||
Project_Sim_Count = 0
|
||||
Project_Folder_Count = 0
|
||||
Echo_Compile_Output = 0
|
||||
Save_Compile_Report = 1
|
||||
Project_Opt_Count = 0
|
||||
ForceSoftPaths = 0
|
||||
ProjectStatusDelay = 5000
|
||||
VERILOG_DoubleClick = Edit
|
||||
VERILOG_CustomDoubleClick =
|
||||
SYSTEMVERILOG_DoubleClick = Edit
|
||||
SYSTEMVERILOG_CustomDoubleClick =
|
||||
VHDL_DoubleClick = Edit
|
||||
VHDL_CustomDoubleClick =
|
||||
PSL_DoubleClick = Edit
|
||||
PSL_CustomDoubleClick =
|
||||
TEXT_DoubleClick = Edit
|
||||
TEXT_CustomDoubleClick =
|
||||
SYSTEMC_DoubleClick = Edit
|
||||
SYSTEMC_CustomDoubleClick =
|
||||
TCL_DoubleClick = Edit
|
||||
TCL_CustomDoubleClick =
|
||||
MACRO_DoubleClick = Edit
|
||||
MACRO_CustomDoubleClick =
|
||||
VCD_DoubleClick = Edit
|
||||
VCD_CustomDoubleClick =
|
||||
SDF_DoubleClick = Edit
|
||||
SDF_CustomDoubleClick =
|
||||
XML_DoubleClick = Edit
|
||||
XML_CustomDoubleClick =
|
||||
LOGFILE_DoubleClick = Edit
|
||||
LOGFILE_CustomDoubleClick =
|
||||
UCDB_DoubleClick = Edit
|
||||
UCDB_CustomDoubleClick =
|
||||
TDB_DoubleClick = Edit
|
||||
TDB_CustomDoubleClick =
|
||||
UPF_DoubleClick = Edit
|
||||
UPF_CustomDoubleClick =
|
||||
PCF_DoubleClick = Edit
|
||||
PCF_CustomDoubleClick =
|
||||
PROJECT_DoubleClick = Edit
|
||||
PROJECT_CustomDoubleClick =
|
||||
VRM_DoubleClick = Edit
|
||||
VRM_CustomDoubleClick =
|
||||
DEBUGDATABASE_DoubleClick = Edit
|
||||
DEBUGDATABASE_CustomDoubleClick =
|
||||
DEBUGARCHIVE_DoubleClick = Edit
|
||||
DEBUGARCHIVE_CustomDoubleClick =
|
||||
Project_Major_Version = 2020
|
||||
Project_Minor_Version = 1
|
||||
@@ -0,0 +1,16 @@
|
||||
module lu #(parameter width = 2) (
|
||||
input logic [1:0] op,
|
||||
input logic [2**width-1:0] A,
|
||||
input logic [2**width-1:0] B,
|
||||
output logic [2**width-1:0] Y);
|
||||
|
||||
always_comb begin
|
||||
case (op)
|
||||
2'b00: Y = A & B;
|
||||
2'b01: Y = A | B;
|
||||
2'b10: Y = A ^ B;
|
||||
2'b11: Y = ~(A | B);
|
||||
default: Y = '0;
|
||||
endcase
|
||||
end
|
||||
endmodule
|
||||
@@ -0,0 +1,59 @@
|
||||
`include "lu.sv"
|
||||
|
||||
module lu_tb #(W=4)();
|
||||
logic [1:0] op;
|
||||
logic [W-1:0] A;
|
||||
logic [W-1:0] B;
|
||||
logic [W-1:0] C;
|
||||
logic [W-1:0] C_exp[16];
|
||||
|
||||
lu #(W) dut();
|
||||
|
||||
integer error_count;
|
||||
initial begin
|
||||
// AND
|
||||
C_exp[0] = {W{1'b0}};
|
||||
C_exp[1] = {W{1'b0}};
|
||||
C_exp[2] = {W{1'b0}};
|
||||
C_exp[3] = {W{1'b0}};
|
||||
// OR
|
||||
C_exp[4] = {W{1'b0}};
|
||||
C_exp[5] = {W{1'b1}};
|
||||
C_exp[6] = {W{1'b1}};
|
||||
C_exp[7] = {W{1'b1}};
|
||||
// XOR
|
||||
C_exp[8] = {W{1'b0}};
|
||||
C_exp[9] = {W{1'b1}};
|
||||
C_exp[10] = {W{1'b1}};
|
||||
C_exp[11] = {W{1'b0}};
|
||||
// NOR
|
||||
C_exp[12] = {W{1'b1}};
|
||||
C_exp[13] = {W{1'b0}};
|
||||
C_exp[14] = {W{1'b0}};
|
||||
C_exp[15] = {W{1'b0}};
|
||||
|
||||
error_count = 0;
|
||||
op = 0;
|
||||
A = 0;
|
||||
B = 0;
|
||||
$display("Beginning LU tests");
|
||||
for (integer N = 0; N < 4; ++N) begin
|
||||
for (integer M = 0; M < 2; ++M) begin
|
||||
for (integer K = 0; K < 2; ++K) begin
|
||||
#1;
|
||||
if (C != C_exp[N*2*2 + M*2 + K]) begin
|
||||
$display("\t\x1b[38;5;9mOp 0b%b(0b%b, 0b%b) produced 0b%b but 0b%b was expected\x1b[m", op, A, B, C, C_exp[N*2*2 + M*2 + K]);
|
||||
error_count = error_count + 1;
|
||||
end
|
||||
B = 1;
|
||||
end
|
||||
A = 1;
|
||||
end
|
||||
A = 0;
|
||||
B = 0;
|
||||
op = op + 1;
|
||||
end
|
||||
if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m");
|
||||
else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count);
|
||||
end
|
||||
endmodule
|
||||
@@ -0,0 +1,46 @@
|
||||
# Loading project Assignment_1_Q2
|
||||
# Compile of lu.sv was successful.
|
||||
# Compile of lu_tb.sv failed with 1 errors.
|
||||
# 2 compiles, 1 failed with 1 error.
|
||||
# Compile of lu_tb.sv failed with 1 errors.
|
||||
# Compile of lu.sv was successful.
|
||||
# Compile of lu_tb.sv was successful.
|
||||
# 2 compiles, 0 failed with no errors.
|
||||
vsim work.lu_tb
|
||||
# vsim work.lu_tb
|
||||
# Start time: 16:26:37 on Sep 08,2026
|
||||
# Loading sv_std.std
|
||||
# Loading work.lu_tb
|
||||
# Loading work.lu
|
||||
# ** Warning: (vsim-2685) [TFMPC] - Too few port connections for 'dut'. Expected 4, found 0.
|
||||
# Time: 0 ps Iteration: 0 Instance: /lu_tb/dut File: /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv Line: 10
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'op'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'A'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'B'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'Y'.
|
||||
add wave -position end sim:/lu_tb/op
|
||||
add wave -position end sim:/lu_tb/A
|
||||
add wave -position end sim:/lu_tb/A
|
||||
add wave -position end sim:/lu_tb/B
|
||||
add wave -position end sim:/lu_tb/C
|
||||
quit -sim
|
||||
# End time: 16:28:07 on Sep 08,2026, Elapsed time: 0:01:30
|
||||
# Errors: 0, Warnings: 12
|
||||
# Compile of lu.sv was successful.
|
||||
# Compile of lu_tb.sv was successful.
|
||||
# 2 compiles, 0 failed with no errors.
|
||||
vsim work.lu_tb
|
||||
# vsim work.lu_tb
|
||||
# Start time: 16:30:51 on Sep 08,2026
|
||||
# Loading sv_std.std
|
||||
# Loading work.lu_tb
|
||||
# Loading work.lu
|
||||
# ** Warning: (vsim-2685) [TFMPC] - Too few port connections for 'dut'. Expected 4, found 0.
|
||||
# Time: 0 ps Iteration: 0 Instance: /lu_tb/dut File: /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv Line: 10
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'op'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'A'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'B'.
|
||||
# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'Y'.
|
||||
quit -sim
|
||||
# End time: 16:31:17 on Sep 08,2026, Elapsed time: 0:00:26
|
||||
# Errors: 0, Warnings: 7
|
||||
Binary file not shown.
@@ -0,0 +1,61 @@
|
||||
m255
|
||||
K4
|
||||
z2
|
||||
!s11f vlog 2020.1 2020.02, Feb 28 2020
|
||||
13
|
||||
!s112 1.1
|
||||
!i10d 8192
|
||||
!i10e 25
|
||||
!i10f 100
|
||||
cModel Technology
|
||||
d/home/oliver/intelFPGA/20.1/modelsim_ase/bin
|
||||
vlu
|
||||
Z0 DXx6 sv_std 3 std 0 22 VYECXdT12H8WgbUP_5Y6:3
|
||||
Z1 !s110 1788849038
|
||||
!i10b 1
|
||||
!s100 nmDP9zlMCJDa@W3_FY5m[2
|
||||
Z2 !s11b Dg1SIo80bB@j0V0VzS_@n1
|
||||
Il^hWCV0VAo9mz6NG=G9=51
|
||||
Z3 VDg1SIo80bB@j0V0VzS_@n1
|
||||
S1
|
||||
Z4 d/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim
|
||||
w1788845636
|
||||
8lu.sv
|
||||
Flu.sv
|
||||
!i122 6
|
||||
L0 1 16
|
||||
Z5 OV;L;2020.1;71
|
||||
r1
|
||||
!s85 0
|
||||
31
|
||||
Z6 !s108 1788849037.000000
|
||||
!s107 lu.sv|/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv|
|
||||
Z7 !s90 -reportprogress|300|-work|work|-sv|-stats=none|/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv|
|
||||
!i113 1
|
||||
Z8 o-work work -sv
|
||||
Z9 tCvgOpt 0
|
||||
vlu_tb
|
||||
R0
|
||||
R1
|
||||
!i10b 1
|
||||
!s100 gdCQZUG[6;:5f<I_jIOd?1
|
||||
R2
|
||||
IOAk[D29KmDQ0<F@G9G][k3
|
||||
R3
|
||||
S1
|
||||
R4
|
||||
w1788848626
|
||||
8/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv
|
||||
F/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv
|
||||
!i122 6
|
||||
L0 3 57
|
||||
R5
|
||||
r1
|
||||
!s85 0
|
||||
31
|
||||
R6
|
||||
Z10 !s107 lu.sv|/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv|
|
||||
R7
|
||||
!i113 1
|
||||
R8
|
||||
R9
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,4 @@
|
||||
m255
|
||||
K4
|
||||
z0
|
||||
cModel Technology
|
||||
Whitespace-only changes.
Binary file not shown.
@@ -1,6 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845159220 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:59 2026 " "Processing started: Tue Sep 8 15:25:59 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788845159892 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788845164360 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "513 " "Peak virtual memory: 513 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:04 2026 " "Processing ended: Tue Sep 8 15:26:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788845164529 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846115934 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846115934 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:41:55 2026 " "Processing started: Tue Sep 8 15:41:55 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846115934 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788846115934 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788846115934 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788846116615 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788846121685 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "513 " "Peak virtual memory: 513 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846121865 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:42:01 2026 " "Processing ended: Tue Sep 8 15:42:01 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846121865 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846121865 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846121865 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788846121865 ""}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,6 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845172313 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:12 2026 " "Processing started: Tue Sep 8 15:26:12 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172313 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172314 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788845173068 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788845173114 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "658 " "Peak virtual memory: 658 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:13 2026 " "Processing ended: Tue Sep 8 15:26:13 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845173146 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846130996 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846130997 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:42:10 2026 " "Processing started: Tue Sep 8 15:42:10 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846130997 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788846130997 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788846130997 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788846131765 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788846131827 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "658 " "Peak virtual memory: 658 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846131859 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:42:11 2026 " "Processing ended: Tue Sep 8 15:42:11 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846131859 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846131859 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846131859 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788846131859 ""}
|
||||
@@ -1,44 +1,44 @@
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788845129924 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788845129924 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788845129929 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788845130446 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788845130477 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788845130532 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788845137531 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137551 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788845137554 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137574 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788845143638 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788845143639 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788845143639 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788845143640 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788845143640 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788845143641 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788845143641 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788845143644 ""}
|
||||
{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788845143727 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845144437 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788845145074 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788845145346 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845145346 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788845145947 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X11_Y0 X22_Y11 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11"} { { 12 { 0 ""} 11 0 12 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788845151771 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788845151771 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788845152005 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845152008 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.09 " "Total time spent on timing analysis during the Fitter is 0.09 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788845153127 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153162 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845153534 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153534 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845154081 ""}
|
||||
{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:03 " "Fitter post-fit operations ending: elapsed time is 00:00:03" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845156793 ""}
|
||||
{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1788845157057 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1342 " "Peak virtual memory: 1342 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:57 2026 " "Processing ended: Tue Sep 8 15:25:57 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:28 " "Elapsed time: 00:00:28" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:40 " "Total CPU time (on all processors): 00:00:40" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788845157620 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788846086718 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788846086718 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788846086722 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788846086797 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788846086797 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788846087212 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788846087239 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788846087300 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788846094476 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846094496 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788846094498 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788846094498 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788846094498 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788846094498 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788846094499 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788846094499 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788846094499 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788846094499 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788846094499 ""}
|
||||
{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846094517 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788846100702 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788846100702 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788846100703 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788846100703 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788846100704 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788846100704 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788846100705 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788846100707 ""}
|
||||
{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788846100789 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846101473 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788846101809 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788846102125 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846102125 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788846102702 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X11_Y0 X22_Y11 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11"} { { 12 { 0 ""} 11 0 12 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788846108403 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788846108403 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788846108640 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788846108640 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788846108640 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846108642 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.09 " "Total time spent on timing analysis during the Fitter is 0.09 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788846109774 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788846109810 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788846110179 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788846110179 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788846110711 ""}
|
||||
{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:04 " "Fitter post-fit operations ending: elapsed time is 00:00:04" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788846113447 ""}
|
||||
{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1788846113739 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1336 " "Peak virtual memory: 1336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846114319 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:41:54 2026 " "Processing ended: Tue Sep 8 15:41:54 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846114319 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:28 " "Elapsed time: 00:00:28" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846114319 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:40 " "Total CPU time (on all processors): 00:00:40" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846114319 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788846114319 ""}
|
||||
@@ -31,9 +31,9 @@ B[2] => Y.IN1
|
||||
B[3] => Y.IN1
|
||||
B[3] => Y.IN1
|
||||
B[3] => Y.IN1
|
||||
Y[0] << Mux3.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[1] << Mux2.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[2] << Mux1.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[3] << Mux0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[0] <= Mux3.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[1] <= Mux2.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[2] <= Mux1.DB_MAX_OUTPUT_PORT_TYPE
|
||||
Y[3] <= Mux0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,11 +1,11 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845117404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:17 2026 " "Processing started: Tue Sep 8 15:25:17 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117405 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788845126908 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845126908 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788845127047 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788845127799 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788845128163 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788845128163 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788845128210 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788845128210 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:28 2026 " "Processing ended: Tue Sep 8 15:25:28 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845128218 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846074109 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846074109 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:41:13 2026 " "Processing started: Tue Sep 8 15:41:13 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846074109 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846074109 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846074109 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788846074444 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788846074444 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788846083748 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846083748 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788846083888 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788846084609 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788846084962 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788846084962 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788846085010 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788846085010 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788846085010 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788846085010 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:41:25 2026 " "Processing ended: Tue Sep 8 15:41:25 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:12 " "Elapsed time: 00:00:12" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846085017 ""}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,61 +1,61 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845165953 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:05 2026 " "Processing started: Tue Sep 8 15:26:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788845166015 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788845166494 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788845166494 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788845167169 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845167170 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845167170 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788845167173 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788845167179 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845167180 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167181 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167185 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167186 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167187 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845167191 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845167229 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845168178 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168269 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168271 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168272 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168274 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168275 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168276 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845168279 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845168532 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845169075 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169120 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169121 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169122 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169123 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169124 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845169125 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169274 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169274 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169276 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169277 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169280 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169281 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169282 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "738 " "Peak virtual memory: 738 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:10 2026 " "Processing ended: Tue Sep 8 15:26:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788845170776 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846123810 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846123811 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:42:03 2026 " "Processing started: Tue Sep 8 15:42:03 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846123811 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846123811 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846123811 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788846123898 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788846124685 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788846124686 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846124781 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846124781 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788846125575 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846125575 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846125576 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846125576 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846125577 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846125577 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788846125578 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788846125584 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788846125584 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125585 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125589 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125590 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125591 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125592 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125593 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788846125596 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788846125648 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788846126673 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846126766 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846126766 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846126766 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846126767 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126767 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126769 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126770 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126771 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126771 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126772 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788846126773 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788846127036 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788846127620 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846127689 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127692 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127692 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127693 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127694 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127694 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788846127696 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846127873 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846127873 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846127874 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846127874 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127875 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127878 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127880 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127881 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127883 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788846129404 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788846129405 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "756 " "Peak virtual memory: 756 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:42:09 2026 " "Processing ended: Tue Sep 8 15:42:09 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788846129429 ""}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,7 +1,7 @@
|
||||
start_full_compilation:s:00:00:57
|
||||
start_full_compilation:s:00:00:59
|
||||
start_analysis_synthesis:s:00:00:12-start_full_compilation
|
||||
start_analysis_elaboration:s-start_full_compilation
|
||||
start_fitter:s:00:00:30-start_full_compilation
|
||||
start_assembler:s:00:00:07-start_full_compilation
|
||||
start_timing_analyzer:s:00:00:06-start_full_compilation
|
||||
start_timing_analyzer:s:00:00:08-start_full_compilation
|
||||
start_eda_netlist_writer:s:00:00:02-start_full_compilation
|
||||
@@ -1,136 +1,136 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788844777337 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844777337 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:19:37 2026 " "Processing started: Tue Sep 8 15:19:37 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844777337 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844777337 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844777337 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788844777642 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788844777643 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788844787158 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844787158 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788844787299 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788844788196 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788844788611 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788844788611 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788844788738 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788844788738 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788844788738 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788844788738 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "433 " "Peak virtual memory: 433 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:19:48 2026 " "Processing ended: Tue Sep 8 15:19:48 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:26 " "Total CPU time (on all processors): 00:00:26" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844788744 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1788844790494 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844790495 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:19:49 2026 " "Processing started: Tue Sep 8 15:19:49 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844790495 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1788844790495 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1788844790495 ""}
|
||||
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1788844790779 ""}
|
||||
{ "Info" "0" "" "Project = A1_Q2" { } { } 0 0 "Project = A1_Q2" 0 0 "Fitter" 0 0 1788844790780 ""}
|
||||
{ "Info" "0" "" "Revision = lu" { } { } 0 0 "Revision = lu" 0 0 "Fitter" 0 0 1788844790781 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788844790987 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788844790987 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788844790993 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788844791067 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788844791068 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788844791497 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788844791544 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788844791697 ""}
|
||||
{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "14 14 " "No exact pin location assignment(s) for 14 pins of 14 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." { } { } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1788844791969 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788844798727 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844798805 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788844798823 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788844798823 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788844798824 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788844798824 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788844798824 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788844798824 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788844798824 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788844798825 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788844798825 ""}
|
||||
{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844798840 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788844804981 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788844804982 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788844804982 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788844804983 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788844804985 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788844804985 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788844804985 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788844804990 ""}
|
||||
{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788844805033 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:02 " "Fitter placement preparation operations ending: elapsed time is 00:00:02" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844806561 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788844807646 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788844808016 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844808016 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788844808589 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X57_Y24 X68_Y36 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X57_Y24 to location X68_Y36" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X57_Y24 to location X68_Y36"} { { 12 { 0 ""} 57 24 12 13 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788844814262 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788844814262 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788844814418 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788844814418 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788844814418 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844814421 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.10 " "Total time spent on timing analysis during the Fitter is 0.10 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788844815480 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788844815517 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788844815904 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788844815904 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788844816449 ""}
|
||||
{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:04 " "Fitter post-fit operations ending: elapsed time is 00:00:04" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844819073 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1341 " "Peak virtual memory: 1341 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:19 2026 " "Processing ended: Tue Sep 8 15:20:19 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:30 " "Elapsed time: 00:00:30" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:42 " "Total CPU time (on all processors): 00:00:42" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788844819911 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1788844821731 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844821731 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:21 2026 " "Processing started: Tue Sep 8 15:20:21 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844821731 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788844821731 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788844821732 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788844822417 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788844827122 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "521 " "Peak virtual memory: 521 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:27 2026 " "Processing ended: Tue Sep 8 15:20:27 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788844827324 ""}
|
||||
{ "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1788844828123 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1788844828885 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844828886 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:28 2026 " "Processing started: Tue Sep 8 15:20:28 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844828886 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844828886 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844828886 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788844828964 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788844829446 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788844829446 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844829519 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844829519 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788844830103 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844830103 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844830104 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844830104 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844830104 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844830105 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788844830105 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788844830109 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788844830110 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830111 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830123 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830124 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830125 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830126 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830126 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788844830128 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788844830170 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788844831123 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844831219 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844831219 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844831219 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844831220 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831220 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831222 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831223 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831224 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831224 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831225 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788844831227 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788844831482 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788844832022 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844832064 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832065 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832066 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832067 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832068 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832068 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788844832070 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844832214 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832215 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832216 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832217 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832217 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832218 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788844833709 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788844833710 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "757 " "Peak virtual memory: 757 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:33 2026 " "Processing ended: Tue Sep 8 15:20:33 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788844833732 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1788844835398 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844835399 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:35 2026 " "Processing started: Tue Sep 8 15:20:35 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844835399 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844835399 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844835399 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788844836147 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788844836215 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "670 " "Peak virtual memory: 670 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:36 2026 " "Processing ended: Tue Sep 8 15:20:36 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844836246 ""}
|
||||
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 15 s " "Quartus Prime Full Compilation was successful. 0 errors, 15 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844836918 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845117404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:17 2026 " "Processing started: Tue Sep 8 15:25:17 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117405 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788845126908 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845126908 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788845127047 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788845127799 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788845128163 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788845128163 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788845128210 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788845128210 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:28 2026 " "Processing ended: Tue Sep 8 15:25:28 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845128218 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1788845129672 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845129672 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:29 2026 " "Processing started: Tue Sep 8 15:25:29 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845129672 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1788845129672 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1788845129672 ""}
|
||||
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1788845129726 ""}
|
||||
{ "Info" "0" "" "Project = A1_Q2" { } { } 0 0 "Project = A1_Q2" 0 0 "Fitter" 0 0 1788845129727 ""}
|
||||
{ "Info" "0" "" "Revision = lu" { } { } 0 0 "Revision = lu" 0 0 "Fitter" 0 0 1788845129727 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788845129924 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788845129924 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788845129929 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788845130446 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788845130477 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788845130532 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788845137531 ""}
|
||||
{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137551 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788845137553 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788845137554 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788845137554 ""}
|
||||
{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137574 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788845143638 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788845143639 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788845143639 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788845143640 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788845143640 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788845143641 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788845143641 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788845143644 ""}
|
||||
{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788845143727 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845144437 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788845145074 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788845145346 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845145346 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788845145947 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X11_Y0 X22_Y11 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11"} { { 12 { 0 ""} 11 0 12 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788845151771 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788845151771 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788845152005 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845152008 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.09 " "Total time spent on timing analysis during the Fitter is 0.09 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788845153127 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153162 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845153534 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153534 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845154081 ""}
|
||||
{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:03 " "Fitter post-fit operations ending: elapsed time is 00:00:03" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845156793 ""}
|
||||
{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1788845157057 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1342 " "Peak virtual memory: 1342 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:57 2026 " "Processing ended: Tue Sep 8 15:25:57 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:28 " "Elapsed time: 00:00:28" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:40 " "Total CPU time (on all processors): 00:00:40" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788845157620 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1788845159220 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:59 2026 " "Processing started: Tue Sep 8 15:25:59 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788845159892 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788845164360 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "513 " "Peak virtual memory: 513 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:04 2026 " "Processing ended: Tue Sep 8 15:26:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788845164529 ""}
|
||||
{ "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1788845165209 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1788845165953 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:05 2026 " "Processing started: Tue Sep 8 15:26:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788845166015 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788845166494 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788845166494 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788845167169 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845167170 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845167170 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788845167173 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788845167179 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845167180 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167181 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167185 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167186 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167187 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845167191 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845167229 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845168178 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168269 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168271 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168272 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168274 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168275 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168276 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845168279 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845168532 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845169075 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169120 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169121 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169122 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169123 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169124 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845169125 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169274 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169274 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169276 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169277 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169280 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169281 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169282 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "738 " "Peak virtual memory: 738 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:10 2026 " "Processing ended: Tue Sep 8 15:26:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788845170776 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1788845172313 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:12 2026 " "Processing started: Tue Sep 8 15:26:12 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172313 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172314 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788845173068 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788845173114 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "658 " "Peak virtual memory: 658 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:13 2026 " "Processing ended: Tue Sep 8 15:26:13 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845173146 ""}
|
||||
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 15 s " "Quartus Prime Full Compilation was successful. 0 errors, 15 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845173822 ""}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,5 +1,5 @@
|
||||
Assembler report for lu
|
||||
Tue Sep 8 15:26:04 2026
|
||||
Tue Sep 8 15:42:01 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -38,7 +38,7 @@ on the Quartus Prime software download page.
|
||||
+---------------------------------------------------------------+
|
||||
; Assembler Summary ;
|
||||
+-----------------------+---------------------------------------+
|
||||
; Assembler Status ; Successful - Tue Sep 8 15:26:04 2026 ;
|
||||
; Assembler Status ; Successful - Tue Sep 8 15:42:01 2026 ;
|
||||
; Revision Name ; lu ;
|
||||
; Top-level Entity Name ; lu ;
|
||||
; Family ; Cyclone V ;
|
||||
@@ -78,14 +78,14 @@ on the Quartus Prime software download page.
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime Assembler
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Tue Sep 8 15:25:59 2026
|
||||
Info: Processing started: Tue Sep 8 15:41:55 2026
|
||||
Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
Info (115030): Assembler is generating device programming files
|
||||
Info: Quartus Prime Assembler was successful. 0 errors, 1 warning
|
||||
Info: Peak virtual memory: 513 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:26:04 2026
|
||||
Info: Elapsed time: 00:00:05
|
||||
Info: Total CPU time (on all processors): 00:00:05
|
||||
Info: Processing ended: Tue Sep 8 15:42:01 2026
|
||||
Info: Elapsed time: 00:00:06
|
||||
Info: Total CPU time (on all processors): 00:00:06
|
||||
|
||||
|
||||
@@ -1 +1 @@
|
||||
Tue Sep 8 15:26:13 2026
|
||||
Tue Sep 8 15:42:12 2026
|
||||
@@ -1,5 +1,5 @@
|
||||
EDA Netlist Writer report for lu
|
||||
Tue Sep 8 15:26:13 2026
|
||||
Tue Sep 8 15:42:11 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -37,7 +37,7 @@ on the Quartus Prime software download page.
|
||||
+-------------------------------------------------------------------+
|
||||
; EDA Netlist Writer Summary ;
|
||||
+---------------------------+---------------------------------------+
|
||||
; EDA Netlist Writer Status ; Successful - Tue Sep 8 15:26:13 2026 ;
|
||||
; EDA Netlist Writer Status ; Successful - Tue Sep 8 15:42:11 2026 ;
|
||||
; Revision Name ; lu ;
|
||||
; Top-level Entity Name ; lu ;
|
||||
; Family ; Cyclone V ;
|
||||
@@ -81,13 +81,13 @@ on the Quartus Prime software download page.
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime EDA Netlist Writer
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Tue Sep 8 15:26:12 2026
|
||||
Info: Processing started: Tue Sep 8 15:42:10 2026
|
||||
Info: Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
Info (204019): Generated file lu.svo in folder "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/" for EDA simulation tool
|
||||
Info: Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning
|
||||
Info: Peak virtual memory: 658 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:26:13 2026
|
||||
Info: Processing ended: Tue Sep 8 15:42:11 2026
|
||||
Info: Elapsed time: 00:00:01
|
||||
Info: Total CPU time (on all processors): 00:00:01
|
||||
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
Fitter report for lu
|
||||
Tue Sep 8 15:25:57 2026
|
||||
Tue Sep 8 15:41:53 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -58,7 +58,7 @@ on the Quartus Prime software download page.
|
||||
+-----------------------------------------------------------------------------------+
|
||||
; Fitter Summary ;
|
||||
+---------------------------------+-------------------------------------------------+
|
||||
; Fitter Status ; Successful - Tue Sep 8 15:25:57 2026 ;
|
||||
; Fitter Status ; Successful - Tue Sep 8 15:41:53 2026 ;
|
||||
; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ;
|
||||
; Revision Name ; lu ;
|
||||
; Top-level Entity Name ; lu ;
|
||||
@@ -1371,11 +1371,11 @@ Info (334003): Started post-fitting delay annotation
|
||||
Info (334004): Delay annotation completed successfully
|
||||
Info (334003): Started post-fitting delay annotation
|
||||
Info (334004): Delay annotation completed successfully
|
||||
Info (11801): Fitter post-fit operations ending: elapsed time is 00:00:03
|
||||
Info (11801): Fitter post-fit operations ending: elapsed time is 00:00:04
|
||||
Warning (171167): Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information.
|
||||
Info: Quartus Prime Fitter was successful. 0 errors, 6 warnings
|
||||
Info: Peak virtual memory: 1342 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:25:57 2026
|
||||
Info: Peak virtual memory: 1336 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:41:54 2026
|
||||
Info: Elapsed time: 00:00:28
|
||||
Info: Total CPU time (on all processors): 00:00:40
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
Fitter Status : Successful - Tue Sep 8 15:25:57 2026
|
||||
Fitter Status : Successful - Tue Sep 8 15:41:53 2026
|
||||
Quartus Prime Version : 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Revision Name : lu
|
||||
Top-level Entity Name : lu
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
Flow report for lu
|
||||
Tue Sep 8 15:26:13 2026
|
||||
Tue Sep 8 15:42:11 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -41,7 +41,7 @@ on the Quartus Prime software download page.
|
||||
+-----------------------------------------------------------------------------------+
|
||||
; Flow Summary ;
|
||||
+---------------------------------+-------------------------------------------------+
|
||||
; Flow Status ; Successful - Tue Sep 8 15:26:13 2026 ;
|
||||
; Flow Status ; Successful - Tue Sep 8 15:42:11 2026 ;
|
||||
; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ;
|
||||
; Revision Name ; lu ;
|
||||
; Top-level Entity Name ; lu ;
|
||||
@@ -68,7 +68,7 @@ on the Quartus Prime software download page.
|
||||
+-------------------+---------------------+
|
||||
; Option ; Setting ;
|
||||
+-------------------+---------------------+
|
||||
; Start date & time ; 09/08/2026 15:25:17 ;
|
||||
; Start date & time ; 09/08/2026 15:41:14 ;
|
||||
; Main task ; Compilation ;
|
||||
; Revision Name ; lu ;
|
||||
+-------------------+---------------------+
|
||||
@@ -79,7 +79,7 @@ on the Quartus Prime software download page.
|
||||
+-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+
|
||||
; Assignment Name ; Value ; Default Value ; Entity Name ; Section Id ;
|
||||
+-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+
|
||||
; COMPILER_SIGNATURE_ID ; 86000517901476.178884511706024 ; -- ; -- ; -- ;
|
||||
; COMPILER_SIGNATURE_ID ; 86000517901476.178884607407150 ; -- ; -- ; -- ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_timing ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_boundary_scan ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_signal_integrity ;
|
||||
@@ -102,11 +102,11 @@ on the Quartus Prime software download page.
|
||||
; Module Name ; Elapsed Time ; Average Processors Used ; Peak Virtual Memory ; Total CPU Time (on all processors) ;
|
||||
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
|
||||
; Analysis & Synthesis ; 00:00:11 ; 1.0 ; 422 MB ; 00:00:25 ;
|
||||
; Fitter ; 00:00:28 ; 1.0 ; 1342 MB ; 00:00:39 ;
|
||||
; Assembler ; 00:00:05 ; 1.0 ; 513 MB ; 00:00:05 ;
|
||||
; Timing Analyzer ; 00:00:05 ; 1.0 ; 738 MB ; 00:00:05 ;
|
||||
; Fitter ; 00:00:27 ; 1.0 ; 1336 MB ; 00:00:40 ;
|
||||
; Assembler ; 00:00:06 ; 1.0 ; 513 MB ; 00:00:06 ;
|
||||
; Timing Analyzer ; 00:00:06 ; 1.0 ; 756 MB ; 00:00:06 ;
|
||||
; EDA Netlist Writer ; 00:00:01 ; 1.0 ; 658 MB ; 00:00:01 ;
|
||||
; Total ; 00:00:50 ; -- ; -- ; 00:01:15 ;
|
||||
; Total ; 00:00:51 ; -- ; -- ; 00:01:18 ;
|
||||
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
|
||||
|
||||
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
Analysis & Synthesis report for lu
|
||||
Tue Sep 8 15:25:28 2026
|
||||
Tue Sep 8 15:41:25 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -45,7 +45,7 @@ on the Quartus Prime software download page.
|
||||
+-----------------------------------------------------------------------------------+
|
||||
; Analysis & Synthesis Summary ;
|
||||
+---------------------------------+-------------------------------------------------+
|
||||
; Analysis & Synthesis Status ; Successful - Tue Sep 8 15:25:28 2026 ;
|
||||
; Analysis & Synthesis Status ; Successful - Tue Sep 8 15:41:25 2026 ;
|
||||
; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ;
|
||||
; Revision Name ; lu ;
|
||||
; Top-level Entity Name ; lu ;
|
||||
@@ -278,7 +278,7 @@ Note: In order to hide this table in the UI and the text report file, please set
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime Analysis & Synthesis
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Tue Sep 8 15:25:17 2026
|
||||
Info: Processing started: Tue Sep 8 15:41:13 2026
|
||||
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
Info (20030): Parallel compilation is enabled and will use 2 of the 2 processors detected
|
||||
@@ -294,8 +294,8 @@ Info (21057): Implemented 18 device resources after synthesis - the final resour
|
||||
Info (21061): Implemented 4 logic cells
|
||||
Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning
|
||||
Info: Peak virtual memory: 439 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:25:28 2026
|
||||
Info: Elapsed time: 00:00:11
|
||||
Info: Processing ended: Tue Sep 8 15:41:25 2026
|
||||
Info: Elapsed time: 00:00:12
|
||||
Info: Total CPU time (on all processors): 00:00:25
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
Analysis & Synthesis Status : Successful - Tue Sep 8 15:25:28 2026
|
||||
Analysis & Synthesis Status : Successful - Tue Sep 8 15:41:25 2026
|
||||
Quartus Prime Version : 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Revision Name : lu
|
||||
Top-level Entity Name : lu
|
||||
|
||||
Binary file not shown.
@@ -1,5 +1,5 @@
|
||||
Timing Analyzer report for lu
|
||||
Tue Sep 8 15:26:10 2026
|
||||
Tue Sep 8 15:42:09 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
@@ -461,7 +461,7 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime Timing Analyzer
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Tue Sep 8 15:26:05 2026
|
||||
Info: Processing started: Tue Sep 8 15:42:03 2026
|
||||
Info: Command: quartus_sta A1_Q2 -c lu
|
||||
Info: qsta_default_script.tcl version: #1
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
@@ -521,9 +521,9 @@ Info (332140): No Minimum Pulse Width paths to report
|
||||
Info (332102): Design is not fully constrained for setup requirements
|
||||
Info (332102): Design is not fully constrained for hold requirements
|
||||
Info: Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings
|
||||
Info: Peak virtual memory: 738 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:26:10 2026
|
||||
Info: Elapsed time: 00:00:05
|
||||
Info: Total CPU time (on all processors): 00:00:05
|
||||
Info: Peak virtual memory: 756 megabytes
|
||||
Info: Processing ended: Tue Sep 8 15:42:09 2026
|
||||
Info: Elapsed time: 00:00:06
|
||||
Info: Total CPU time (on all processors): 00:00:06
|
||||
|
||||
|
||||
@@ -17,7 +17,7 @@
|
||||
// PROGRAM "Quartus Prime"
|
||||
// VERSION "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition"
|
||||
|
||||
// DATE "09/08/2026 15:26:13"
|
||||
// DATE "09/08/2026 15:42:11"
|
||||
|
||||
//
|
||||
// Device: Altera 5CGXFC5C6F27C7 Package FBGA672
|
||||
@@ -34,10 +34,10 @@ module lu (
|
||||
A,
|
||||
B,
|
||||
Y);
|
||||
input [1:0] op;
|
||||
input [3:0] A;
|
||||
input [3:0] B;
|
||||
output [3:0] Y;
|
||||
input logic [1:0] op ;
|
||||
input logic [3:0] A ;
|
||||
input logic [3:0] B ;
|
||||
output logic [3:0] Y ;
|
||||
|
||||
// Design Ports Information
|
||||
// Y[0] => Location: PIN_F7, I/O Standard: 2.5 V, Current Strength: Default
|
||||
|
||||
Binary file not shown.
@@ -1,3 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Fri Sep 4 13:02:46 2026
|
||||
Creation_Time = Tue Sep 8 15:43:22 2026
|
||||
+5
-4
@@ -1,8 +1,9 @@
|
||||
module asu #(width=8)(input logic [0:0] op,
|
||||
input logic[width-1:0] A, input logic[width-1:0] B,
|
||||
output logic[width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN);
|
||||
module asu #(parameter width = 2)(
|
||||
input logic [0:0] op,
|
||||
input logic[2**width-1:0] A, input logic[2**width-1:0] B,
|
||||
output logic[2**width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN);
|
||||
|
||||
logic [width-1:0] operand;
|
||||
logic [2**width-1:0] operand;
|
||||
always_comb begin
|
||||
// A + (sub) ? B : -B
|
||||
// Adds an extra bit to all operands to calculate the carry bit. Not optimal for hardware synthesis
|
||||
|
||||
@@ -0,0 +1,16 @@
|
||||
module asu #(width=8)(input logic [0:0] op,
|
||||
input logic[width-1:0] A, input logic[width-1:0] B,
|
||||
output logic[width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN);
|
||||
|
||||
logic [width-1:0] operand;
|
||||
always_comb begin
|
||||
// A + (sub) ? B : -B
|
||||
// Adds an extra bit to all operands to calculate the carry bit. Not optimal for hardware synthesis
|
||||
operand = (B ^ {(width){op}});
|
||||
{COUT, OUT_1} = A + operand + {{(width-1){1'b0}}, op};
|
||||
end
|
||||
|
||||
// Need to do this outside of the always_comb block because parameter-based bitslicing/indexing isn't supported?
|
||||
// Cin for width-2'th bit to later be xor'ed with COUT to determine if a signed overflow occured for the MIPS architecture
|
||||
assign OUT_CIN = A[width-1] ^ operand[width-1] ^ OUT_1[width-1];
|
||||
endmodule
|
||||
+3
-3
@@ -1,13 +1,13 @@
|
||||
`include "lu.sv"
|
||||
|
||||
module lu_tb #(W=8)();
|
||||
module lu_tb #(parameter W=4)();
|
||||
logic [1:0] op;
|
||||
logic [W-1:0] A;
|
||||
logic [W-1:0] B;
|
||||
logic [W-1:0] C;
|
||||
logic [W-1:0] C_exp[16];
|
||||
|
||||
lu #(W) dut();
|
||||
lu #(W/2) dut();
|
||||
|
||||
integer error_count;
|
||||
initial begin
|
||||
@@ -56,4 +56,4 @@ module lu_tb #(W=8)();
|
||||
if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m");
|
||||
else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count);
|
||||
end
|
||||
endmodule
|
||||
endmodule
|
||||
@@ -0,0 +1,59 @@
|
||||
`include "lu.sv"
|
||||
|
||||
module lu_tb #(W=4)();
|
||||
logic [1:0] op;
|
||||
logic [W-1:0] A;
|
||||
logic [W-1:0] B;
|
||||
logic [W-1:0] C;
|
||||
logic [W-1:0] C_exp[16];
|
||||
|
||||
lu #(2) dut();
|
||||
|
||||
integer error_count;
|
||||
initial begin
|
||||
// AND
|
||||
C_exp[0] = {W{1'b0}};
|
||||
C_exp[1] = {W{1'b0}};
|
||||
C_exp[2] = {W{1'b0}};
|
||||
C_exp[3] = {W{1'b0}};
|
||||
// OR
|
||||
C_exp[4] = {W{1'b0}};
|
||||
C_exp[5] = {W{1'b1}};
|
||||
C_exp[6] = {W{1'b1}};
|
||||
C_exp[7] = {W{1'b1}};
|
||||
// XOR
|
||||
C_exp[8] = {W{1'b0}};
|
||||
C_exp[9] = {W{1'b1}};
|
||||
C_exp[10] = {W{1'b1}};
|
||||
C_exp[11] = {W{1'b0}};
|
||||
// NOR
|
||||
C_exp[12] = {W{1'b1}};
|
||||
C_exp[13] = {W{1'b0}};
|
||||
C_exp[14] = {W{1'b0}};
|
||||
C_exp[15] = {W{1'b0}};
|
||||
|
||||
error_count = 0;
|
||||
op = 0;
|
||||
A = 0;
|
||||
B = 0;
|
||||
$display("Beginning LU tests");
|
||||
for (integer N = 0; N < 4; ++N) begin
|
||||
for (integer M = 0; M < 2; ++M) begin
|
||||
for (integer K = 0; K < 2; ++K) begin
|
||||
#1;
|
||||
if (C != C_exp[N*2*2 + M*2 + K]) begin
|
||||
$display("\t\x1b[38;5;9mOp 0b%b(0b%b, 0b%b) produced 0b%b but 0b%b was expected\x1b[m", op, A, B, C, C_exp[N*2*2 + M*2 + K]);
|
||||
error_count = error_count + 1;
|
||||
end
|
||||
B = 1;
|
||||
end
|
||||
A = 1;
|
||||
end
|
||||
A = 0;
|
||||
B = 0;
|
||||
op = op + 1;
|
||||
end
|
||||
if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m");
|
||||
else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count);
|
||||
end
|
||||
endmodule
|
||||
Reference in new issue
Block a user