diff --git a/ModelSim/Assignment_1_Q2.cr.mti b/ModelSim/Assignment_1_Q2.cr.mti new file mode 100644 index 0000000..8b13789 --- /dev/null +++ b/ModelSim/Assignment_1_Q2.cr.mti @@ -0,0 +1 @@ + diff --git a/ModelSim/Assignment_1_Q2.mpf b/ModelSim/Assignment_1_Q2.mpf new file mode 100644 index 0000000..5a526f4 --- /dev/null +++ b/ModelSim/Assignment_1_Q2.mpf @@ -0,0 +1,466 @@ +; Copyright 1991-2009 Mentor Graphics Corporation +; +; All Rights Reserved. +; +; THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS THE PROPERTY OF +; MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS SUBJECT TO LICENSE TERMS. +; + +[Library] +std = $MODEL_TECH/../std +ieee = $MODEL_TECH/../ieee +verilog = $MODEL_TECH/../verilog +vital2000 = $MODEL_TECH/../vital2000 +std_developerskit = $MODEL_TECH/../std_developerskit +synopsys = $MODEL_TECH/../synopsys +modelsim_lib = $MODEL_TECH/../modelsim_lib +sv_std = $MODEL_TECH/../sv_std + +; Altera Primitive libraries +; +; VHDL Section +; +altera_mf = $MODEL_TECH/../altera/vhdl/altera_mf +altera = $MODEL_TECH/../altera/vhdl/altera +altera_lnsim = $MODEL_TECH/../altera/vhdl/altera_lnsim +lpm = $MODEL_TECH/../altera/vhdl/220model +220model = $MODEL_TECH/../altera/vhdl/220model +maxii = $MODEL_TECH/../altera/vhdl/maxii +maxv = $MODEL_TECH/../altera/vhdl/maxv +fiftyfivenm = $MODEL_TECH/../altera/vhdl/fiftyfivenm +sgate = $MODEL_TECH/../altera/vhdl/sgate +arriaii = $MODEL_TECH/../altera/vhdl/arriaii +arriaii_hssi = $MODEL_TECH/../altera/vhdl/arriaii_hssi +arriaii_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaii_pcie_hip +arriaiigz = $MODEL_TECH/../altera/vhdl/arriaiigz +arriaiigz_hssi = $MODEL_TECH/../altera/vhdl/arriaiigz_hssi +arriaiigz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriaiigz_pcie_hip +stratixiv = $MODEL_TECH/../altera/vhdl/stratixiv +stratixiv_hssi = $MODEL_TECH/../altera/vhdl/stratixiv_hssi +stratixiv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixiv_pcie_hip +cycloneiv = $MODEL_TECH/../altera/vhdl/cycloneiv +cycloneiv_hssi = $MODEL_TECH/../altera/vhdl/cycloneiv_hssi +cycloneiv_pcie_hip = $MODEL_TECH/../altera/vhdl/cycloneiv_pcie_hip +cycloneive = $MODEL_TECH/../altera/vhdl/cycloneive +stratixv = $MODEL_TECH/../altera/vhdl/stratixv +stratixv_hssi = $MODEL_TECH/../altera/vhdl/stratixv_hssi +stratixv_pcie_hip = $MODEL_TECH/../altera/vhdl/stratixv_pcie_hip +arriavgz = $MODEL_TECH/../altera/vhdl/arriavgz +arriavgz_hssi = $MODEL_TECH/../altera/vhdl/arriavgz_hssi +arriavgz_pcie_hip = $MODEL_TECH/../altera/vhdl/arriavgz_pcie_hip +arriav = $MODEL_TECH/../altera/vhdl/arriav +cyclonev = $MODEL_TECH/../altera/vhdl/cyclonev +twentynm = $MODEL_TECH/../altera/vhdl/twentynm +twentynm_hssi = $MODEL_TECH/../altera/vhdl/twentynm_hssi +twentynm_hip = $MODEL_TECH/../altera/vhdl/twentynm_hip +cyclone10lp = $MODEL_TECH/../altera/vhdl/cyclone10lp +; +; Verilog Section +; +altera_mf_ver = $MODEL_TECH/../altera/verilog/altera_mf +altera_ver = $MODEL_TECH/../altera/verilog/altera +altera_lnsim_ver = $MODEL_TECH/../altera/verilog/altera_lnsim +lpm_ver = $MODEL_TECH/../altera/verilog/220model +220model_ver = $MODEL_TECH/../altera/verilog/220model +maxii_ver = $MODEL_TECH/../altera/verilog/maxii +maxv_ver = $MODEL_TECH/../altera/verilog/maxv +fiftyfivenm_ver = $MODEL_TECH/../altera/verilog/fiftyfivenm +sgate_ver = $MODEL_TECH/../altera/verilog/sgate +arriaii_ver = $MODEL_TECH/../altera/verilog/arriaii +arriaii_hssi_ver = $MODEL_TECH/../altera/verilog/arriaii_hssi +arriaii_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaii_pcie_hip +arriaiigz_ver = $MODEL_TECH/../altera/verilog/arriaiigz +arriaiigz_hssi_ver = $MODEL_TECH/../altera/verilog/arriaiigz_hssi +arriaiigz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriaiigz_pcie_hip +stratixiv_ver = $MODEL_TECH/../altera/verilog/stratixiv +stratixiv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixiv_hssi +stratixiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixiv_pcie_hip +stratixv_ver = $MODEL_TECH/../altera/verilog/stratixv +stratixv_hssi_ver = $MODEL_TECH/../altera/verilog/stratixv_hssi +stratixv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/stratixv_pcie_hip +arriavgz_ver = $MODEL_TECH/../altera/verilog/arriavgz +arriavgz_hssi_ver = $MODEL_TECH/../altera/verilog/arriavgz_hssi +arriavgz_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriavgz_pcie_hip +arriav_ver = $MODEL_TECH/../altera/verilog/arriav +arriav_hssi_ver = $MODEL_TECH/../altera/verilog/arriav_hssi +arriav_pcie_hip_ver = $MODEL_TECH/../altera/verilog/arriav_pcie_hip +cyclonev_ver = $MODEL_TECH/../altera/verilog/cyclonev +cyclonev_hssi_ver = $MODEL_TECH/../altera/verilog/cyclonev_hssi +cyclonev_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cyclonev_pcie_hip +cycloneiv_ver = $MODEL_TECH/../altera/verilog/cycloneiv +cycloneiv_hssi_ver = $MODEL_TECH/../altera/verilog/cycloneiv_hssi +cycloneiv_pcie_hip_ver = $MODEL_TECH/../altera/verilog/cycloneiv_pcie_hip +cycloneive_ver = $MODEL_TECH/../altera/verilog/cycloneive +twentynm_ver = $MODEL_TECH/../altera/verilog/twentynm +twentynm_hssi_ver = $MODEL_TECH/../altera/verilog/twentynm_hssi +twentynm_hip_ver = $MODEL_TECH/../altera/verilog/twentynm_hip +cyclone10lp_ver = $MODEL_TECH/../altera/verilog/cyclone10lp + +work = work +[vcom] +; VHDL93 variable selects language version as the default. +; Default is VHDL-2002. +; Value of 0 or 1987 for VHDL-1987. +; Value of 1 or 1993 for VHDL-1993. +; Default or value of 2 or 2002 for VHDL-2002. +; Default or value of 3 or 2008 for VHDL-2008. +VHDL93 = 2002 + +; Show source line containing error. Default is off. +; Show_source = 1 + +; Turn off unbound-component warnings. Default is on. +; Show_Warning1 = 0 + +; Turn off process-without-a-wait-statement warnings. Default is on. +; Show_Warning2 = 0 + +; Turn off null-range warnings. Default is on. +; Show_Warning3 = 0 + +; Turn off no-space-in-time-literal warnings. Default is on. +; Show_Warning4 = 0 + +; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on. +; Show_Warning5 = 0 + +; Turn off optimization for IEEE std_logic_1164 package. Default is on. +; Optimize_1164 = 0 + +; Turn on resolving of ambiguous function overloading in favor of the +; "explicit" function declaration (not the one automatically created by +; the compiler for each type declaration). Default is off. +; The .ini file has Explicit enabled so that std_logic_signed/unsigned +; will match the behavior of synthesis tools. +Explicit = 1 + +; Turn off acceleration of the VITAL packages. Default is to accelerate. +; NoVital = 1 + +; Turn off VITAL compliance checking. Default is checking on. +; NoVitalCheck = 1 + +; Ignore VITAL compliance checking errors. Default is to not ignore. +; IgnoreVitalErrors = 1 + +; Turn off VITAL compliance checking warnings. Default is to show warnings. +; Show_VitalChecksWarnings = 0 + +; Keep silent about case statement static warnings. +; Default is to give a warning. +; NoCaseStaticError = 1 + +; Keep silent about warnings caused by aggregates that are not locally static. +; Default is to give a warning. +; NoOthersStaticError = 1 + +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn off "Loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on some limited synthesis rule compliance checking. Checks only: +; -- signals used (read) by a process must be in the sensitivity list +; CheckSynthesis = 1 + +; Activate optimizations on expressions that do not involve signals, +; waits, or function/procedure/task invocations. Default is off. +; ScalarOpts = 1 + +; Require the user to specify a configuration for all bindings, +; and do not generate a compile time default binding for the +; component. This will result in an elaboration error of +; 'component not bound' if the user fails to do so. Avoids the rare +; issue of a false dependency upon the unused default binding. +; RequireConfigForAllDefaultBinding = 1 + +; Inhibit range checking on subscripts of arrays. Range checking on +; scalars defined with subtypes is inhibited by default. +; NoIndexCheck = 1 + +; Inhibit range checks on all (implicit and explicit) assignments to +; scalar objects defined with subtypes. +; NoRangeCheck = 1 + +[vlog] + +; Turn off inclusion of debugging info within design units. +; Default is to include debugging info. +; NoDebug = 1 + +; Turn off "loading..." messages. Default is messages on. +; Quiet = 1 + +; Turn on Verilog hazard checking (order-dependent accessing of global vars). +; Default is off. +; Hazard = 1 + +; Turn on converting regular Verilog identifiers to uppercase. Allows case +; insensitivity for module names. Default is no conversion. +; UpCase = 1 + +; Turn on incremental compilation of modules. Default is off. +; Incremental = 1 + +; Turns on lint-style checking. +; Show_Lint = 1 + +[vsim] +; Simulator resolution +; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100. +Resolution = ps + +; User time unit for run commands +; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the +; unit specified for Resolution. For example, if Resolution is 100ps, +; then UserTimeUnit defaults to ps. +; Should generally be set to default. +UserTimeUnit = default + +; Default run length +RunLength = 100 ps + +; Maximum iterations that can be run without advancing simulation time +IterationLimit = 5000 + +; Directive to license manager: +; vhdl Immediately reserve a VHDL license +; vlog Immediately reserve a Verilog license +; plus Immediately reserve a VHDL and Verilog license +; nomgc Do not look for Mentor Graphics Licenses +; nomti Do not look for Model Technology Licenses +; noqueue Do not wait in the license queue when a license isn't available +; viewsim Try for viewer license but accept simulator license(s) instead +; of queuing for viewer license +; License = plus + +; Stop the simulator after a VHDL/Verilog assertion message +; 0 = Note 1 = Warning 2 = Error 3 = Failure 4 = Fatal +BreakOnAssertion = 3 + +; Assertion Message Format +; %S - Severity Level +; %R - Report Message +; %T - Time of assertion +; %D - Delta +; %I - Instance or Region pathname (if available) +; %% - print '%' character +; AssertionFormat = "** %S: %R\n Time: %T Iteration: %D%I\n" + +; Assertion File - alternate file for storing VHDL/Verilog assertion messages +; AssertFile = assert.log + +; Default radix for all windows and commands... +; Set to symbolic, ascii, binary, octal, decimal, hex, unsigned +DefaultRadix = symbolic + +; VSIM Startup command +; Startup = do startup.do + +; File for saving command transcript +TranscriptFile = transcript + +; File for saving command history +; CommandHistory = cmdhist.log + +; Specify whether paths in simulator commands should be described +; in VHDL or Verilog format. +; For VHDL, PathSeparator = / +; For Verilog, PathSeparator = . +; Must not be the same character as DatasetSeparator. +PathSeparator = / + +; Specify the dataset separator for fully rooted contexts. +; The default is ':'. For example, sim:/top +; Must not be the same character as PathSeparator. +DatasetSeparator = : + +; Disable VHDL assertion messages +; IgnoreNote = 1 +; IgnoreWarning = 1 +; IgnoreError = 1 +; IgnoreFailure = 1 + +; Default force kind. May be freeze, drive, deposit, or default +; or in other terms, fixed, wired, or charged. +; A value of "default" will use the signal kind to determine the +; force kind, drive for resolved signals, freeze for unresolved signals +; DefaultForceKind = freeze + +; If zero, open files when elaborated; otherwise, open files on +; first read or write. Default is 0. +; DelayFileOpen = 1 + +; Control VHDL files opened for write. +; 0 = Buffered, 1 = Unbuffered +UnbufferedOutput = 0 + +; Control the number of VHDL files open concurrently. +; This number should always be less than the current ulimit +; setting for max file descriptors. +; 0 = unlimited +ConcurrentFileLimit = 40 + +; Control the number of hierarchical regions displayed as +; part of a signal name shown in the Wave window. +; A value of zero tells VSIM to display the full name. +; The default is 0. +; WaveSignalNameWidth = 0 + +; Turn off warnings from the std_logic_arith, std_logic_unsigned +; and std_logic_signed packages. +; StdArithNoWarnings = 1 + +; Turn off warnings from the IEEE numeric_std and numeric_bit packages. +; NumericStdNoWarnings = 1 + +; Control the format of the (VHDL) FOR generate statement label +; for each iteration. Do not quote it. +; The format string here must contain the conversion codes %s and %d, +; in that order, and no other conversion codes. The %s represents +; the generate_label; the %d represents the generate parameter value +; at a particular generate iteration (this is the position number if +; the generate parameter is of an enumeration type). Embedded whitespace +; is allowed (but discouraged); leading and trailing whitespace is ignored. +; Application of the format must result in a unique scope name over all +; such names in the design so that name lookup can function properly. +; GenerateFormat = %s__%d + +; Specify whether checkpoint files should be compressed. +; The default is 1 (compressed). +; CheckpointCompressMode = 0 + +; List of dynamically loaded objects for Verilog PLI applications +; Veriuser = veriuser.sl + +; Specify default options for the restart command. Options can be one +; or more of: -force -nobreakpoint -nolist -nolog -nowave +; DefaultRestartOptions = -force + +; HP-UX 10.20 ONLY - Enable memory locking to speed up large designs +; (> 500 megabyte memory footprint). Default is disabled. +; Specify number of megabytes to lock. +; LockedMemory = 1000 + +; Turn on (1) or off (0) WLF file compression. +; The default is 1 (compress WLF file). +; WLFCompress = 0 + +; Specify whether to save all design hierarchy (1) in the WLF file +; or only regions containing logged signals (0). +; The default is 0 (save only regions with logged signals). +; WLFSaveAllRegions = 1 + +; WLF file time limit. Limit WLF file by time, as closely as possible, +; to the specified amount of simulation time. When the limit is exceeded +; the earliest times get truncated from the file. +; If both time and size limits are specified the most restrictive is used. +; UserTimeUnits are used if time units are not specified. +; The default is 0 (no limit). Example: WLFTimeLimit = {100 ms} +; WLFTimeLimit = 0 + +; WLF file size limit. Limit WLF file size, as closely as possible, +; to the specified number of megabytes. If both time and size limits +; are specified then the most restrictive is used. +; The default is 0 (no limit). +; WLFSizeLimit = 1000 + +; Specify whether or not a WLF file should be deleted when the +; simulation ends. A value of 1 will cause the WLF file to be deleted. +; The default is 0 (do not delete WLF file when simulation ends). +; WLFDeleteOnQuit = 1 + +; Automatic SDF compilation +; Disables automatic compilation of SDF files in flows that support it. +; Default is on, uncomment to turn off. +; NoAutoSDFCompile = 1 + +[lmc] + +[msg_system] +; Change a message severity or suppress a message. +; The format is: = [,...] +; Examples: +; note = 3009 +; warning = 3033 +; error = 3010,3016 +; fatal = 3016,3033 +; suppress = 3009,3016,3043 +; The command verror can be used to get the complete +; description of a message. + +; Control transcripting of elaboration/runtime messages. +; The default is to have messages appear in the transcript and +; recorded in the wlf file (messages that are recorded in the +; wlf file can be viewed in the MsgViewer). The other settings +; are to send messages only to the transcript or only to the +; wlf file. The valid values are +; both {default} +; tran {transcript only} +; wlf {wlf file only} +; msgmode = both +[Project] +** Warning: ; Warning -- Do not edit the project properties directly. +; Property names are dynamic in nature and property +; values have special syntax. Changing property data directly +; can result in a corrupt MPF file. All project properties +; can be modified through project window dialogs. +Project_Version = 6 +Project_DefaultLib = work +Project_SortMethod = unused +Project_Files_Count = 2 +Project_File_0 = /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu.sv +Project_File_P_0 = cover_toggle 0 file_type systemverilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat SV vlog_nodebug 0 folder {Top Level} last_compile 1788845636 cover_fsm 0 cover_branch 0 vlog_noload 0 cover_excludedefault 0 vlog_enable0In 0 vlog_disableopt 0 cover_covercells 0 voptflow 1 vlog_showsource 0 vlog_hazard 0 cover_optlevel 3 toggle - vlog_0InOptions {} ood 0 cover_noshort 0 vlog_upper 0 compile_to work vlog_options {} compile_order 0 cover_expr 0 dont_compile 0 cover_stmt 0 +Project_File_1 = /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv +Project_File_P_1 = cover_toggle 0 file_type systemverilog group_id 0 cover_exttoggle 0 cover_nofec 0 cover_cond 0 vlog_1995compat SV vlog_nodebug 0 folder {Top Level} last_compile 1788848626 cover_fsm 0 cover_branch 0 vlog_noload 0 cover_excludedefault 0 vlog_enable0In 0 vlog_disableopt 0 cover_covercells 0 voptflow 1 vlog_showsource 0 vlog_hazard 0 cover_optlevel 3 toggle - vlog_0InOptions {} ood 0 cover_noshort 0 vlog_upper 0 compile_to work vlog_options {} compile_order 1 cover_expr 0 dont_compile 0 cover_stmt 0 +Project_Sim_Count = 0 +Project_Folder_Count = 0 +Echo_Compile_Output = 0 +Save_Compile_Report = 1 +Project_Opt_Count = 0 +ForceSoftPaths = 0 +ProjectStatusDelay = 5000 +VERILOG_DoubleClick = Edit +VERILOG_CustomDoubleClick = +SYSTEMVERILOG_DoubleClick = Edit +SYSTEMVERILOG_CustomDoubleClick = +VHDL_DoubleClick = Edit +VHDL_CustomDoubleClick = +PSL_DoubleClick = Edit +PSL_CustomDoubleClick = +TEXT_DoubleClick = Edit +TEXT_CustomDoubleClick = +SYSTEMC_DoubleClick = Edit +SYSTEMC_CustomDoubleClick = +TCL_DoubleClick = Edit +TCL_CustomDoubleClick = +MACRO_DoubleClick = Edit +MACRO_CustomDoubleClick = +VCD_DoubleClick = Edit +VCD_CustomDoubleClick = +SDF_DoubleClick = Edit +SDF_CustomDoubleClick = +XML_DoubleClick = Edit +XML_CustomDoubleClick = +LOGFILE_DoubleClick = Edit +LOGFILE_CustomDoubleClick = +UCDB_DoubleClick = Edit +UCDB_CustomDoubleClick = +TDB_DoubleClick = Edit +TDB_CustomDoubleClick = +UPF_DoubleClick = Edit +UPF_CustomDoubleClick = +PCF_DoubleClick = Edit +PCF_CustomDoubleClick = +PROJECT_DoubleClick = Edit +PROJECT_CustomDoubleClick = +VRM_DoubleClick = Edit +VRM_CustomDoubleClick = +DEBUGDATABASE_DoubleClick = Edit +DEBUGDATABASE_CustomDoubleClick = +DEBUGARCHIVE_DoubleClick = Edit +DEBUGARCHIVE_CustomDoubleClick = +Project_Major_Version = 2020 +Project_Minor_Version = 1 diff --git a/ModelSim/lu.sv b/ModelSim/lu.sv new file mode 100644 index 0000000..cd2c34b --- /dev/null +++ b/ModelSim/lu.sv @@ -0,0 +1,16 @@ +module lu #(parameter width = 2) ( + input logic [1:0] op, + input logic [2**width-1:0] A, + input logic [2**width-1:0] B, + output logic [2**width-1:0] Y); + + always_comb begin + case (op) + 2'b00: Y = A & B; + 2'b01: Y = A | B; + 2'b10: Y = A ^ B; + 2'b11: Y = ~(A | B); + default: Y = '0; + endcase + end +endmodule \ No newline at end of file diff --git a/ModelSim/lu_tb.sv b/ModelSim/lu_tb.sv new file mode 100644 index 0000000..18679a1 --- /dev/null +++ b/ModelSim/lu_tb.sv @@ -0,0 +1,59 @@ +`include "lu.sv" + +module lu_tb #(W=4)(); + logic [1:0] op; + logic [W-1:0] A; + logic [W-1:0] B; + logic [W-1:0] C; + logic [W-1:0] C_exp[16]; + + lu #(W) dut(); + + integer error_count; + initial begin + // AND + C_exp[0] = {W{1'b0}}; + C_exp[1] = {W{1'b0}}; + C_exp[2] = {W{1'b0}}; + C_exp[3] = {W{1'b0}}; + // OR + C_exp[4] = {W{1'b0}}; + C_exp[5] = {W{1'b1}}; + C_exp[6] = {W{1'b1}}; + C_exp[7] = {W{1'b1}}; + // XOR + C_exp[8] = {W{1'b0}}; + C_exp[9] = {W{1'b1}}; + C_exp[10] = {W{1'b1}}; + C_exp[11] = {W{1'b0}}; + // NOR + C_exp[12] = {W{1'b1}}; + C_exp[13] = {W{1'b0}}; + C_exp[14] = {W{1'b0}}; + C_exp[15] = {W{1'b0}}; + + error_count = 0; + op = 0; + A = 0; + B = 0; + $display("Beginning LU tests"); + for (integer N = 0; N < 4; ++N) begin + for (integer M = 0; M < 2; ++M) begin + for (integer K = 0; K < 2; ++K) begin + #1; + if (C != C_exp[N*2*2 + M*2 + K]) begin + $display("\t\x1b[38;5;9mOp 0b%b(0b%b, 0b%b) produced 0b%b but 0b%b was expected\x1b[m", op, A, B, C, C_exp[N*2*2 + M*2 + K]); + error_count = error_count + 1; + end + B = 1; + end + A = 1; + end + A = 0; + B = 0; + op = op + 1; + end + if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m"); + else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count); + end +endmodule diff --git a/ModelSim/transcript b/ModelSim/transcript new file mode 100644 index 0000000..15b8760 --- /dev/null +++ b/ModelSim/transcript @@ -0,0 +1,46 @@ +# Loading project Assignment_1_Q2 +# Compile of lu.sv was successful. +# Compile of lu_tb.sv failed with 1 errors. +# 2 compiles, 1 failed with 1 error. +# Compile of lu_tb.sv failed with 1 errors. +# Compile of lu.sv was successful. +# Compile of lu_tb.sv was successful. +# 2 compiles, 0 failed with no errors. +vsim work.lu_tb +# vsim work.lu_tb +# Start time: 16:26:37 on Sep 08,2026 +# Loading sv_std.std +# Loading work.lu_tb +# Loading work.lu +# ** Warning: (vsim-2685) [TFMPC] - Too few port connections for 'dut'. Expected 4, found 0. +# Time: 0 ps Iteration: 0 Instance: /lu_tb/dut File: /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv Line: 10 +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'op'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'A'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'B'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'Y'. +add wave -position end sim:/lu_tb/op +add wave -position end sim:/lu_tb/A +add wave -position end sim:/lu_tb/A +add wave -position end sim:/lu_tb/B +add wave -position end sim:/lu_tb/C +quit -sim +# End time: 16:28:07 on Sep 08,2026, Elapsed time: 0:01:30 +# Errors: 0, Warnings: 12 +# Compile of lu.sv was successful. +# Compile of lu_tb.sv was successful. +# 2 compiles, 0 failed with no errors. +vsim work.lu_tb +# vsim work.lu_tb +# Start time: 16:30:51 on Sep 08,2026 +# Loading sv_std.std +# Loading work.lu_tb +# Loading work.lu +# ** Warning: (vsim-2685) [TFMPC] - Too few port connections for 'dut'. Expected 4, found 0. +# Time: 0 ps Iteration: 0 Instance: /lu_tb/dut File: /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv Line: 10 +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'op'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'A'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'B'. +# ** Warning: (vsim-3722) /home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv(10): [TFMPC] - Missing connection for port 'Y'. +quit -sim +# End time: 16:31:17 on Sep 08,2026, Elapsed time: 0:00:26 +# Errors: 0, Warnings: 7 diff --git a/ModelSim/vsim.wlf b/ModelSim/vsim.wlf new file mode 100644 index 0000000..68e8e4f Binary files /dev/null and b/ModelSim/vsim.wlf differ diff --git a/ModelSim/work/_info b/ModelSim/work/_info new file mode 100644 index 0000000..633fb91 --- /dev/null +++ b/ModelSim/work/_info @@ -0,0 +1,61 @@ +m255 +K4 +z2 +!s11f vlog 2020.1 2020.02, Feb 28 2020 +13 +!s112 1.1 +!i10d 8192 +!i10e 25 +!i10f 100 +cModel Technology +d/home/oliver/intelFPGA/20.1/modelsim_ase/bin +vlu +Z0 DXx6 sv_std 3 std 0 22 VYECXdT12H8WgbUP_5Y6:3 +Z1 !s110 1788849038 +!i10b 1 +!s100 nmDP9zlMCJDa@W3_FY5m[2 +Z2 !s11b Dg1SIo80bB@j0V0VzS_@n1 +Il^hWCV0VAo9mz6NG=G9=51 +Z3 VDg1SIo80bB@j0V0VzS_@n1 +S1 +Z4 d/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim +w1788845636 +8lu.sv +Flu.sv +!i122 6 +L0 1 16 +Z5 OV;L;2020.1;71 +r1 +!s85 0 +31 +Z6 !s108 1788849037.000000 +!s107 lu.sv|/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv| +Z7 !s90 -reportprogress|300|-work|work|-sv|-stats=none|/home/oliver/Documents/FPGA_Dev/FPGA_Uni/ModelSim/lu_tb.sv| +!i113 1 +Z8 o-work work -sv +Z9 tCvgOpt 0 +vlu_tb +R0 +R1 +!i10b 1 +!s100 gdCQZUG[6;:5f Y.IN1 B[3] => Y.IN1 B[3] => Y.IN1 B[3] => Y.IN1 -Y[0] << Mux3.DB_MAX_OUTPUT_PORT_TYPE -Y[1] << Mux2.DB_MAX_OUTPUT_PORT_TYPE -Y[2] << Mux1.DB_MAX_OUTPUT_PORT_TYPE -Y[3] << Mux0.DB_MAX_OUTPUT_PORT_TYPE +Y[0] <= Mux3.DB_MAX_OUTPUT_PORT_TYPE +Y[1] <= Mux2.DB_MAX_OUTPUT_PORT_TYPE +Y[2] <= Mux1.DB_MAX_OUTPUT_PORT_TYPE +Y[3] <= Mux0.DB_MAX_OUTPUT_PORT_TYPE diff --git a/Quartus/A1_Q2/db/lu.hif b/Quartus/A1_Q2/db/lu.hif index 5d4a652..53eb7ad 100644 Binary files a/Quartus/A1_Q2/db/lu.hif and b/Quartus/A1_Q2/db/lu.hif differ diff --git a/Quartus/A1_Q2/db/lu.map.bpm b/Quartus/A1_Q2/db/lu.map.bpm index 0c94484..810d5d8 100644 Binary files a/Quartus/A1_Q2/db/lu.map.bpm and b/Quartus/A1_Q2/db/lu.map.bpm differ diff --git a/Quartus/A1_Q2/db/lu.map.cdb b/Quartus/A1_Q2/db/lu.map.cdb index 8169717..aef8254 100644 Binary files a/Quartus/A1_Q2/db/lu.map.cdb and b/Quartus/A1_Q2/db/lu.map.cdb differ diff --git a/Quartus/A1_Q2/db/lu.map.hdb b/Quartus/A1_Q2/db/lu.map.hdb index 1eb9c57..eccd8b0 100644 Binary files a/Quartus/A1_Q2/db/lu.map.hdb and b/Quartus/A1_Q2/db/lu.map.hdb differ diff --git a/Quartus/A1_Q2/db/lu.map.qmsg b/Quartus/A1_Q2/db/lu.map.qmsg index 78a6a12..845f873 100644 --- a/Quartus/A1_Q2/db/lu.map.qmsg +++ b/Quartus/A1_Q2/db/lu.map.qmsg @@ -1,11 +1,11 @@ -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845117404 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:17 2026 " "Processing started: Tue Sep 8 15:25:17 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117404 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117405 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""} -{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""} -{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788845126908 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845126908 ""} -{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788845127047 ""} -{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788845127799 ""} -{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788845128163 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788845128163 ""} -{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788845128210 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788845128210 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:28 2026 " "Processing ended: Tue Sep 8 15:25:28 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845128218 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846074109 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846074109 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:41:13 2026 " "Processing started: Tue Sep 8 15:41:13 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846074109 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846074109 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846074109 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788846074444 ""} +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788846074444 ""} +{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788846083748 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846083748 ""} +{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788846083888 ""} +{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788846084609 ""} +{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788846084962 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788846084962 ""} +{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788846085010 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788846085010 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788846085010 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788846085010 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:41:25 2026 " "Processing ended: Tue Sep 8 15:41:25 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:12 " "Elapsed time: 00:00:12" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846085017 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788846085017 ""} diff --git a/Quartus/A1_Q2/db/lu.map.rdb b/Quartus/A1_Q2/db/lu.map.rdb index cf69d79..e86e77a 100644 Binary files a/Quartus/A1_Q2/db/lu.map.rdb and b/Quartus/A1_Q2/db/lu.map.rdb differ diff --git a/Quartus/A1_Q2/db/lu.map_bb.cdb b/Quartus/A1_Q2/db/lu.map_bb.cdb index e5112c4..08ce60e 100644 Binary files a/Quartus/A1_Q2/db/lu.map_bb.cdb and b/Quartus/A1_Q2/db/lu.map_bb.cdb differ diff --git a/Quartus/A1_Q2/db/lu.map_bb.hdb b/Quartus/A1_Q2/db/lu.map_bb.hdb index 9a4f3cd..e65ee0b 100644 Binary files a/Quartus/A1_Q2/db/lu.map_bb.hdb and b/Quartus/A1_Q2/db/lu.map_bb.hdb differ diff --git a/Quartus/A1_Q2/db/lu.pplq.rdb b/Quartus/A1_Q2/db/lu.pplq.rdb index 46c284e..e1f255e 100644 Binary files a/Quartus/A1_Q2/db/lu.pplq.rdb and b/Quartus/A1_Q2/db/lu.pplq.rdb differ diff --git a/Quartus/A1_Q2/db/lu.pre_map.hdb b/Quartus/A1_Q2/db/lu.pre_map.hdb index 48dbf1b..9f7c5ec 100644 Binary files a/Quartus/A1_Q2/db/lu.pre_map.hdb and b/Quartus/A1_Q2/db/lu.pre_map.hdb differ diff --git a/Quartus/A1_Q2/db/lu.rtlv.hdb b/Quartus/A1_Q2/db/lu.rtlv.hdb index 07ae62c..a2c08d0 100644 Binary files a/Quartus/A1_Q2/db/lu.rtlv.hdb and b/Quartus/A1_Q2/db/lu.rtlv.hdb differ diff --git a/Quartus/A1_Q2/db/lu.rtlv_sg.cdb b/Quartus/A1_Q2/db/lu.rtlv_sg.cdb index aee7670..1727a48 100644 Binary files a/Quartus/A1_Q2/db/lu.rtlv_sg.cdb and b/Quartus/A1_Q2/db/lu.rtlv_sg.cdb differ diff --git a/Quartus/A1_Q2/db/lu.sta.qmsg b/Quartus/A1_Q2/db/lu.sta.qmsg index a203663..d31f13b 100644 --- a/Quartus/A1_Q2/db/lu.sta.qmsg +++ b/Quartus/A1_Q2/db/lu.sta.qmsg @@ -1,61 +1,61 @@ -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845165953 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:05 2026 " "Processing started: Tue Sep 8 15:26:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""} -{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788845166015 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788845166494 ""} -{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788845166494 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""} -{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788845167169 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845167170 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845167170 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} -{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} -{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788845167173 ""} -{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788845167179 ""} -{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845167180 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167181 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167185 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167186 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167187 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""} -{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845167191 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845167229 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845168178 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168269 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168271 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168272 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168274 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168275 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168276 ""} -{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845168279 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845168532 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845169075 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169120 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169121 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169122 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169123 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169124 ""} -{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845169125 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169274 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169274 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169276 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169277 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169280 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169281 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169282 ""} -{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""} -{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "738 " "Peak virtual memory: 738 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:10 2026 " "Processing ended: Tue Sep 8 15:26:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788845170776 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788846123810 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788846123811 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:42:03 2026 " "Processing started: Tue Sep 8 15:42:03 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788846123811 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846123811 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846123811 ""} +{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788846123898 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788846124685 ""} +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788846124686 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846124781 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846124781 ""} +{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788846125575 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846125575 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846125576 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846125576 ""} +{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788846125577 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846125577 ""} +{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788846125578 ""} +{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788846125584 ""} +{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788846125584 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125585 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125589 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125590 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125591 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125592 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846125593 ""} +{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788846125596 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788846125648 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788846126673 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846126766 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846126766 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846126766 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846126767 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126767 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126769 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126770 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126771 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126771 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846126772 ""} +{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788846126773 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788846127036 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788846127620 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846127689 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846127690 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127692 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127692 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127693 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127694 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127694 ""} +{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788846127696 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788846127873 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788846127873 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788846127874 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788846127874 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127875 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127878 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127880 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127881 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788846127883 ""} +{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788846129404 ""} +{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788846129405 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "756 " "Peak virtual memory: 756 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:42:09 2026 " "Processing ended: Tue Sep 8 15:42:09 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788846129429 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788846129429 ""} diff --git a/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_0c.ddb b/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_0c.ddb index b5e85db..8cebf9f 100644 Binary files a/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_0c.ddb and b/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_0c.ddb differ diff --git a/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_85c.ddb b/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_85c.ddb index 83fb548..ba6448f 100644 Binary files a/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_85c.ddb and b/Quartus/A1_Q2/db/lu.tiscmp.fast_1100mv_85c.ddb differ diff --git a/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_0c.ddb b/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_0c.ddb index 40157c2..5cca6bc 100644 Binary files a/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_0c.ddb and b/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_0c.ddb differ diff --git a/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_85c.ddb b/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_85c.ddb index 2e19f51..285c481 100644 Binary files a/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_85c.ddb and b/Quartus/A1_Q2/db/lu.tiscmp.slow_1100mv_85c.ddb differ diff --git a/Quartus/A1_Q2/db/lu.tmw_info b/Quartus/A1_Q2/db/lu.tmw_info index 275efa6..7f49395 100644 --- a/Quartus/A1_Q2/db/lu.tmw_info +++ b/Quartus/A1_Q2/db/lu.tmw_info @@ -1,7 +1,7 @@ -start_full_compilation:s:00:00:57 +start_full_compilation:s:00:00:59 start_analysis_synthesis:s:00:00:12-start_full_compilation start_analysis_elaboration:s-start_full_compilation start_fitter:s:00:00:30-start_full_compilation start_assembler:s:00:00:07-start_full_compilation -start_timing_analyzer:s:00:00:06-start_full_compilation +start_timing_analyzer:s:00:00:08-start_full_compilation start_eda_netlist_writer:s:00:00:02-start_full_compilation diff --git a/Quartus/A1_Q2/db/prev_cmp_A1_Q2.qmsg b/Quartus/A1_Q2/db/prev_cmp_A1_Q2.qmsg index 9cdf3dd..9c7bf07 100644 --- a/Quartus/A1_Q2/db/prev_cmp_A1_Q2.qmsg +++ b/Quartus/A1_Q2/db/prev_cmp_A1_Q2.qmsg @@ -1,136 +1,136 @@ -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788844777337 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844777337 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:19:37 2026 " "Processing started: Tue Sep 8 15:19:37 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844777337 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844777337 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844777337 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788844777642 ""} -{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788844777643 ""} -{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788844787158 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844787158 ""} -{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788844787299 ""} -{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788844788196 ""} -{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788844788611 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788844788611 ""} -{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788844788738 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788844788738 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788844788738 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788844788738 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "433 " "Peak virtual memory: 433 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:19:48 2026 " "Processing ended: Tue Sep 8 15:19:48 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:26 " "Total CPU time (on all processors): 00:00:26" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844788744 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788844788744 ""} -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1788844790494 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844790495 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:19:49 2026 " "Processing started: Tue Sep 8 15:19:49 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844790495 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1788844790495 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1788844790495 ""} -{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1788844790779 ""} -{ "Info" "0" "" "Project = A1_Q2" { } { } 0 0 "Project = A1_Q2" 0 0 "Fitter" 0 0 1788844790780 ""} -{ "Info" "0" "" "Revision = lu" { } { } 0 0 "Revision = lu" 0 0 "Fitter" 0 0 1788844790781 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788844790987 ""} -{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788844790987 ""} -{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788844790993 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788844791067 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788844791068 ""} -{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788844791497 ""} -{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788844791544 ""} -{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788844791697 ""} -{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "14 14 " "No exact pin location assignment(s) for 14 pins of 14 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." { } { } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1788844791969 ""} -{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788844798727 ""} -{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844798805 ""} -{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788844798823 ""} -{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788844798823 ""} -{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788844798824 ""} -{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788844798824 ""} -{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788844798824 ""} -{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788844798824 ""} -{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788844798824 ""} -{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788844798825 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788844798825 ""} -{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844798840 ""} -{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788844804981 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788844804982 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788844804982 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788844804983 ""} -{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788844804985 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788844804985 ""} -{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788844804985 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788844804990 ""} -{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788844805033 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:02 " "Fitter placement preparation operations ending: elapsed time is 00:00:02" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844806561 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788844807646 ""} -{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788844808016 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844808016 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788844808589 ""} -{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X57_Y24 X68_Y36 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X57_Y24 to location X68_Y36" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X57_Y24 to location X68_Y36"} { { 12 { 0 ""} 57 24 12 13 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788844814262 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788844814262 ""} -{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788844814418 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788844814418 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788844814418 ""} -{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844814421 ""} -{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.10 " "Total time spent on timing analysis during the Fitter is 0.10 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788844815480 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788844815517 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788844815904 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788844815904 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788844816449 ""} -{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:04 " "Fitter post-fit operations ending: elapsed time is 00:00:04" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788844819073 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1341 " "Peak virtual memory: 1341 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:19 2026 " "Processing ended: Tue Sep 8 15:20:19 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:30 " "Elapsed time: 00:00:30" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:42 " "Total CPU time (on all processors): 00:00:42" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844819911 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788844819911 ""} -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1788844821731 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844821731 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:21 2026 " "Processing started: Tue Sep 8 15:20:21 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844821731 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788844821731 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788844821732 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788844822417 ""} -{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788844827122 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "521 " "Peak virtual memory: 521 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:27 2026 " "Processing ended: Tue Sep 8 15:20:27 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:06 " "Total CPU time (on all processors): 00:00:06" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844827324 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788844827324 ""} -{ "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1788844828123 ""} -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1788844828885 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844828886 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:28 2026 " "Processing started: Tue Sep 8 15:20:28 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844828886 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844828886 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844828886 ""} -{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788844828964 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788844829446 ""} -{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788844829446 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844829519 ""} -{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844829519 ""} -{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788844830103 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844830103 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844830104 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844830104 ""} -{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788844830104 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844830105 ""} -{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788844830105 ""} -{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788844830109 ""} -{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788844830110 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830111 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830123 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830124 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830125 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830126 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844830126 ""} -{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788844830128 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788844830170 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788844831123 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844831219 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844831219 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844831219 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844831220 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831220 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831222 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831223 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831224 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831224 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844831225 ""} -{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788844831227 ""} -{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788844831482 ""} -{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788844832022 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844832064 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844832064 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832065 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832066 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832067 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832068 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832068 ""} -{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788844832070 ""} -{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788844832214 ""} -{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""} -{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""} -{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788844832214 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832215 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832216 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832217 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832217 ""} -{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788844832218 ""} -{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788844833709 ""} -{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788844833710 ""} -{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "757 " "Peak virtual memory: 757 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:33 2026 " "Processing ended: Tue Sep 8 15:20:33 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844833732 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788844833732 ""} -{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1788844835398 ""} -{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788844835399 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:20:35 2026 " "Processing started: Tue Sep 8 15:20:35 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788844835399 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844835399 ""} -{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844835399 ""} -{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788844836147 ""} -{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788844836215 ""} -{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "670 " "Peak virtual memory: 670 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:20:36 2026 " "Processing ended: Tue Sep 8 15:20:36 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788844836246 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844836246 ""} -{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 15 s " "Quartus Prime Full Compilation was successful. 0 errors, 15 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788844836918 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788845117404 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:17 2026 " "Processing started: Tue Sep 8 15:25:17 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845117404 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117404 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu " "Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845117405 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""} +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1788845117742 ""} +{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv 1 1 " "Found 1 design units, including 1 entities, in source file /home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" { { "Info" "ISGN_ENTITY_NAME" "1 lu " "Found entity 1: lu" { } { { "../../modules/lu.sv" "" { Text "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/modules/lu.sv" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1788845126908 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845126908 ""} +{ "Info" "ISGN_START_ELABORATION_TOP" "lu " "Elaborating entity \"lu\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1788845127047 ""} +{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1788845127799 ""} +{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1788845128163 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1788845128163 ""} +{ "Info" "ICUT_CUT_TM_SUMMARY" "18 " "Implemented 18 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "10 " "Implemented 10 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1788845128210 ""} { "Info" "ICUT_CUT_TM_LCELLS" "4 " "Implemented 4 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1788845128210 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1788845128210 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "439 " "Peak virtual memory: 439 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:28 2026 " "Processing ended: Tue Sep 8 15:25:28 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:11 " "Elapsed time: 00:00:11" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:25 " "Total CPU time (on all processors): 00:00:25" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845128218 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1788845128218 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1788845129672 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845129672 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:29 2026 " "Processing started: Tue Sep 8 15:25:29 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845129672 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1788845129672 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_fit --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1788845129672 ""} +{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1788845129726 ""} +{ "Info" "0" "" "Project = A1_Q2" { } { } 0 0 "Project = A1_Q2" 0 0 "Fitter" 0 0 1788845129727 ""} +{ "Info" "0" "" "Revision = lu" { } { } 0 0 "Revision = lu" 0 0 "Fitter" 0 0 1788845129727 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788845129924 ""} +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788845129924 ""} +{ "Info" "IMPP_MPP_USER_DEVICE" "lu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"lu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788845129929 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788845130010 ""} +{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788845130446 ""} +{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788845130477 ""} +{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788845130532 ""} +{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788845137531 ""} +{ "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137551 ""} +{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788845137553 ""} +{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""} +{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788845137553 ""} +{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788845137553 ""} +{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788845137554 ""} +{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788845137554 ""} +{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788845137554 ""} +{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788845137554 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788845137554 ""} +{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:07 " "Fitter preparation operations ending: elapsed time is 00:00:07" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845137574 ""} +{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788845143638 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788845143639 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788845143639 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788845143640 ""} +{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788845143640 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788845143641 ""} +{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788845143641 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788845143644 ""} +{ "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788845143727 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845144437 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788845145074 ""} +{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788845145346 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845145346 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788845145947 ""} +{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X11_Y0 X22_Y11 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11"} { { 12 { 0 ""} 11 0 12 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788845151771 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788845151771 ""} +{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788845152005 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788845152005 ""} +{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845152008 ""} +{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.09 " "Total time spent on timing analysis during the Fitter is 0.09 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788845153127 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153162 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845153534 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788845153534 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788845154081 ""} +{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:03 " "Fitter post-fit operations ending: elapsed time is 00:00:03" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788845156793 ""} +{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1788845157057 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1342 " "Peak virtual memory: 1342 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:25:57 2026 " "Processing ended: Tue Sep 8 15:25:57 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:28 " "Elapsed time: 00:00:28" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:40 " "Total CPU time (on all processors): 00:00:40" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845157620 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788845157620 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1788845159220 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:25:59 2026 " "Processing started: Tue Sep 8 15:25:59 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845159221 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1788845159221 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1788845159892 ""} +{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1788845164360 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "513 " "Peak virtual memory: 513 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:04 2026 " "Processing ended: Tue Sep 8 15:26:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845164529 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1788845164529 ""} +{ "Info" "IFLOW_DISABLED_MODULE" "Power Analyzer FLOW_ENABLE_POWER_ANALYZER " "Skipped module Power Analyzer due to the assignment FLOW_ENABLE_POWER_ANALYZER" { } { } 0 293026 "Skipped module %1!s! due to the assignment %2!s!" 0 0 "Assembler" 0 -1 1788845165209 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1788845165953 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:05 2026 " "Processing started: Tue Sep 8 15:26:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845165953 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta A1_Q2 -c lu " "Command: quartus_sta A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845165953 ""} +{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788845166015 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788845166494 ""} +{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788845166494 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""} +{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845166565 ""} +{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "lu.sdc " "Synopsys Design Constraints File file not found: 'lu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788845167169 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845167170 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845167170 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} +{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845167171 ""} +{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788845167173 ""} +{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788845167179 ""} +{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845167180 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167181 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167185 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167186 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167187 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845167188 ""} +{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845167191 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845167229 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845168178 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845168268 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168269 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168271 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168272 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168274 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168275 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845168276 ""} +{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788845168279 ""} +{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788845168532 ""} +{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788845169075 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169119 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169120 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169121 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169122 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169123 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169124 ""} +{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788845169125 ""} +{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788845169274 ""} +{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788845169274 ""} +{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""} +{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788845169275 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169276 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169277 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169280 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169281 ""} +{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788845169282 ""} +{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""} +{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788845170752 ""} +{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "738 " "Peak virtual memory: 738 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:10 2026 " "Processing ended: Tue Sep 8 15:26:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845170776 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788845170776 ""} +{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1788845172313 ""} +{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} { "Info" "IQEXE_START_BANNER_TIME" "Tue Sep 8 15:26:12 2026 " "Processing started: Tue Sep 8 15:26:12 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788845172313 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172313 ""} +{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu " "Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845172314 ""} +{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1788845173068 ""} +{ "Info" "IWSC_DONE_HDL_GENERATION" "lu.svo /home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/ simulation " "Generated file lu.svo in folder \"/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1788845173114 ""} +{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "658 " "Peak virtual memory: 658 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_END_BANNER_TIME" "Tue Sep 8 15:26:13 2026 " "Processing ended: Tue Sep 8 15:26:13 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788845173146 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845173146 ""} +{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 15 s " "Quartus Prime Full Compilation was successful. 0 errors, 15 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1788845173822 ""} diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.cdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.cdb index fe170bb..827c6a7 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.cdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.cdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.cdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.cdb index bb50ad0..3d4da00 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.cdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.cdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.hdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.hdb index 8fa2aeb..6d505da 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.hdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hbdb.hdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hdb index 418b280..d049aba 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.cmp.hdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.cdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.cdb index bfd13e9..ba0caf6 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.cdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.cdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.dpi b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.dpi index cba8e40..1be12d4 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.dpi and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.dpi differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.cdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.cdb index a743b8b..5a82f25 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.cdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.cdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.hdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.hdb index 3313d1d..b1861f8 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.hdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hbdb.hdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hdb index 5d74215..527ca56 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.root_partition.map.hdb differ diff --git a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.rrp.hdb b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.rrp.hdb index 1023974..2f23fa1 100644 Binary files a/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.rrp.hdb and b/Quartus/A1_Q2/incremental_db/compiled_partitions/lu.rrp.hdb differ diff --git a/Quartus/A1_Q2/lu.qws b/Quartus/A1_Q2/lu.qws new file mode 100644 index 0000000..fbc79a3 Binary files /dev/null and b/Quartus/A1_Q2/lu.qws differ diff --git a/Quartus/A1_Q2/output_files/lu.asm.rpt b/Quartus/A1_Q2/output_files/lu.asm.rpt index 5b657bf..f09f3b8 100644 --- a/Quartus/A1_Q2/output_files/lu.asm.rpt +++ b/Quartus/A1_Q2/output_files/lu.asm.rpt @@ -1,5 +1,5 @@ Assembler report for lu -Tue Sep 8 15:26:04 2026 +Tue Sep 8 15:42:01 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -38,7 +38,7 @@ on the Quartus Prime software download page. +---------------------------------------------------------------+ ; Assembler Summary ; +-----------------------+---------------------------------------+ -; Assembler Status ; Successful - Tue Sep 8 15:26:04 2026 ; +; Assembler Status ; Successful - Tue Sep 8 15:42:01 2026 ; ; Revision Name ; lu ; ; Top-level Entity Name ; lu ; ; Family ; Cyclone V ; @@ -78,14 +78,14 @@ on the Quartus Prime software download page. Info: ******************************************************************* Info: Running Quartus Prime Assembler Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition - Info: Processing started: Tue Sep 8 15:25:59 2026 + Info: Processing started: Tue Sep 8 15:41:55 2026 Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off A1_Q2 -c lu Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. Info (115030): Assembler is generating device programming files Info: Quartus Prime Assembler was successful. 0 errors, 1 warning Info: Peak virtual memory: 513 megabytes - Info: Processing ended: Tue Sep 8 15:26:04 2026 - Info: Elapsed time: 00:00:05 - Info: Total CPU time (on all processors): 00:00:05 + Info: Processing ended: Tue Sep 8 15:42:01 2026 + Info: Elapsed time: 00:00:06 + Info: Total CPU time (on all processors): 00:00:06 diff --git a/Quartus/A1_Q2/output_files/lu.done b/Quartus/A1_Q2/output_files/lu.done index 0ed8a44..b36464f 100644 --- a/Quartus/A1_Q2/output_files/lu.done +++ b/Quartus/A1_Q2/output_files/lu.done @@ -1 +1 @@ -Tue Sep 8 15:26:13 2026 +Tue Sep 8 15:42:12 2026 diff --git a/Quartus/A1_Q2/output_files/lu.eda.rpt b/Quartus/A1_Q2/output_files/lu.eda.rpt index ec4738a..52f34a9 100644 --- a/Quartus/A1_Q2/output_files/lu.eda.rpt +++ b/Quartus/A1_Q2/output_files/lu.eda.rpt @@ -1,5 +1,5 @@ EDA Netlist Writer report for lu -Tue Sep 8 15:26:13 2026 +Tue Sep 8 15:42:11 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -37,7 +37,7 @@ on the Quartus Prime software download page. +-------------------------------------------------------------------+ ; EDA Netlist Writer Summary ; +---------------------------+---------------------------------------+ -; EDA Netlist Writer Status ; Successful - Tue Sep 8 15:26:13 2026 ; +; EDA Netlist Writer Status ; Successful - Tue Sep 8 15:42:11 2026 ; ; Revision Name ; lu ; ; Top-level Entity Name ; lu ; ; Family ; Cyclone V ; @@ -81,13 +81,13 @@ on the Quartus Prime software download page. Info: ******************************************************************* Info: Running Quartus Prime EDA Netlist Writer Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition - Info: Processing started: Tue Sep 8 15:26:12 2026 + Info: Processing started: Tue Sep 8 15:42:10 2026 Info: Command: quartus_eda --read_settings_files=off --write_settings_files=off A1_Q2 -c lu Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. Info (204019): Generated file lu.svo in folder "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q2/simulation/questa/" for EDA simulation tool Info: Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning Info: Peak virtual memory: 658 megabytes - Info: Processing ended: Tue Sep 8 15:26:13 2026 + Info: Processing ended: Tue Sep 8 15:42:11 2026 Info: Elapsed time: 00:00:01 Info: Total CPU time (on all processors): 00:00:01 diff --git a/Quartus/A1_Q2/output_files/lu.fit.rpt b/Quartus/A1_Q2/output_files/lu.fit.rpt index 2e5390b..3e9a51b 100644 --- a/Quartus/A1_Q2/output_files/lu.fit.rpt +++ b/Quartus/A1_Q2/output_files/lu.fit.rpt @@ -1,5 +1,5 @@ Fitter report for lu -Tue Sep 8 15:25:57 2026 +Tue Sep 8 15:41:53 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -58,7 +58,7 @@ on the Quartus Prime software download page. +-----------------------------------------------------------------------------------+ ; Fitter Summary ; +---------------------------------+-------------------------------------------------+ -; Fitter Status ; Successful - Tue Sep 8 15:25:57 2026 ; +; Fitter Status ; Successful - Tue Sep 8 15:41:53 2026 ; ; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ; ; Revision Name ; lu ; ; Top-level Entity Name ; lu ; @@ -1371,11 +1371,11 @@ Info (334003): Started post-fitting delay annotation Info (334004): Delay annotation completed successfully Info (334003): Started post-fitting delay annotation Info (334004): Delay annotation completed successfully -Info (11801): Fitter post-fit operations ending: elapsed time is 00:00:03 +Info (11801): Fitter post-fit operations ending: elapsed time is 00:00:04 Warning (171167): Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information. Info: Quartus Prime Fitter was successful. 0 errors, 6 warnings - Info: Peak virtual memory: 1342 megabytes - Info: Processing ended: Tue Sep 8 15:25:57 2026 + Info: Peak virtual memory: 1336 megabytes + Info: Processing ended: Tue Sep 8 15:41:54 2026 Info: Elapsed time: 00:00:28 Info: Total CPU time (on all processors): 00:00:40 diff --git a/Quartus/A1_Q2/output_files/lu.fit.summary b/Quartus/A1_Q2/output_files/lu.fit.summary index a56475e..51ec57c 100644 --- a/Quartus/A1_Q2/output_files/lu.fit.summary +++ b/Quartus/A1_Q2/output_files/lu.fit.summary @@ -1,4 +1,4 @@ -Fitter Status : Successful - Tue Sep 8 15:25:57 2026 +Fitter Status : Successful - Tue Sep 8 15:41:53 2026 Quartus Prime Version : 25.1std.0 Build 1129 10/21/2025 SC Lite Edition Revision Name : lu Top-level Entity Name : lu diff --git a/Quartus/A1_Q2/output_files/lu.flow.rpt b/Quartus/A1_Q2/output_files/lu.flow.rpt index 41d00c8..c0e9196 100644 --- a/Quartus/A1_Q2/output_files/lu.flow.rpt +++ b/Quartus/A1_Q2/output_files/lu.flow.rpt @@ -1,5 +1,5 @@ Flow report for lu -Tue Sep 8 15:26:13 2026 +Tue Sep 8 15:42:11 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -41,7 +41,7 @@ on the Quartus Prime software download page. +-----------------------------------------------------------------------------------+ ; Flow Summary ; +---------------------------------+-------------------------------------------------+ -; Flow Status ; Successful - Tue Sep 8 15:26:13 2026 ; +; Flow Status ; Successful - Tue Sep 8 15:42:11 2026 ; ; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ; ; Revision Name ; lu ; ; Top-level Entity Name ; lu ; @@ -68,7 +68,7 @@ on the Quartus Prime software download page. +-------------------+---------------------+ ; Option ; Setting ; +-------------------+---------------------+ -; Start date & time ; 09/08/2026 15:25:17 ; +; Start date & time ; 09/08/2026 15:41:14 ; ; Main task ; Compilation ; ; Revision Name ; lu ; +-------------------+---------------------+ @@ -79,7 +79,7 @@ on the Quartus Prime software download page. +-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+ ; Assignment Name ; Value ; Default Value ; Entity Name ; Section Id ; +-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+ -; COMPILER_SIGNATURE_ID ; 86000517901476.178884511706024 ; -- ; -- ; -- ; +; COMPILER_SIGNATURE_ID ; 86000517901476.178884607407150 ; -- ; -- ; -- ; ; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_timing ; ; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_boundary_scan ; ; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_signal_integrity ; @@ -102,11 +102,11 @@ on the Quartus Prime software download page. ; Module Name ; Elapsed Time ; Average Processors Used ; Peak Virtual Memory ; Total CPU Time (on all processors) ; +----------------------+--------------+-------------------------+---------------------+------------------------------------+ ; Analysis & Synthesis ; 00:00:11 ; 1.0 ; 422 MB ; 00:00:25 ; -; Fitter ; 00:00:28 ; 1.0 ; 1342 MB ; 00:00:39 ; -; Assembler ; 00:00:05 ; 1.0 ; 513 MB ; 00:00:05 ; -; Timing Analyzer ; 00:00:05 ; 1.0 ; 738 MB ; 00:00:05 ; +; Fitter ; 00:00:27 ; 1.0 ; 1336 MB ; 00:00:40 ; +; Assembler ; 00:00:06 ; 1.0 ; 513 MB ; 00:00:06 ; +; Timing Analyzer ; 00:00:06 ; 1.0 ; 756 MB ; 00:00:06 ; ; EDA Netlist Writer ; 00:00:01 ; 1.0 ; 658 MB ; 00:00:01 ; -; Total ; 00:00:50 ; -- ; -- ; 00:01:15 ; +; Total ; 00:00:51 ; -- ; -- ; 00:01:18 ; +----------------------+--------------+-------------------------+---------------------+------------------------------------+ diff --git a/Quartus/A1_Q2/output_files/lu.map.rpt b/Quartus/A1_Q2/output_files/lu.map.rpt index 659bc0c..7476f01 100644 --- a/Quartus/A1_Q2/output_files/lu.map.rpt +++ b/Quartus/A1_Q2/output_files/lu.map.rpt @@ -1,5 +1,5 @@ Analysis & Synthesis report for lu -Tue Sep 8 15:25:28 2026 +Tue Sep 8 15:41:25 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -45,7 +45,7 @@ on the Quartus Prime software download page. +-----------------------------------------------------------------------------------+ ; Analysis & Synthesis Summary ; +---------------------------------+-------------------------------------------------+ -; Analysis & Synthesis Status ; Successful - Tue Sep 8 15:25:28 2026 ; +; Analysis & Synthesis Status ; Successful - Tue Sep 8 15:41:25 2026 ; ; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ; ; Revision Name ; lu ; ; Top-level Entity Name ; lu ; @@ -278,7 +278,7 @@ Note: In order to hide this table in the UI and the text report file, please set Info: ******************************************************************* Info: Running Quartus Prime Analysis & Synthesis Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition - Info: Processing started: Tue Sep 8 15:25:17 2026 + Info: Processing started: Tue Sep 8 15:41:13 2026 Info: Command: quartus_map --read_settings_files=on --write_settings_files=off A1_Q2 -c lu Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. Info (20030): Parallel compilation is enabled and will use 2 of the 2 processors detected @@ -294,8 +294,8 @@ Info (21057): Implemented 18 device resources after synthesis - the final resour Info (21061): Implemented 4 logic cells Info: Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning Info: Peak virtual memory: 439 megabytes - Info: Processing ended: Tue Sep 8 15:25:28 2026 - Info: Elapsed time: 00:00:11 + Info: Processing ended: Tue Sep 8 15:41:25 2026 + Info: Elapsed time: 00:00:12 Info: Total CPU time (on all processors): 00:00:25 diff --git a/Quartus/A1_Q2/output_files/lu.map.summary b/Quartus/A1_Q2/output_files/lu.map.summary index fe6e7a7..6b8e0e8 100644 --- a/Quartus/A1_Q2/output_files/lu.map.summary +++ b/Quartus/A1_Q2/output_files/lu.map.summary @@ -1,4 +1,4 @@ -Analysis & Synthesis Status : Successful - Tue Sep 8 15:25:28 2026 +Analysis & Synthesis Status : Successful - Tue Sep 8 15:41:25 2026 Quartus Prime Version : 25.1std.0 Build 1129 10/21/2025 SC Lite Edition Revision Name : lu Top-level Entity Name : lu diff --git a/Quartus/A1_Q2/output_files/lu.sof b/Quartus/A1_Q2/output_files/lu.sof index 609eb79..f2bdb8b 100644 Binary files a/Quartus/A1_Q2/output_files/lu.sof and b/Quartus/A1_Q2/output_files/lu.sof differ diff --git a/Quartus/A1_Q2/output_files/lu.sta.rpt b/Quartus/A1_Q2/output_files/lu.sta.rpt index 4ec02ed..1a0fe65 100644 --- a/Quartus/A1_Q2/output_files/lu.sta.rpt +++ b/Quartus/A1_Q2/output_files/lu.sta.rpt @@ -1,5 +1,5 @@ Timing Analyzer report for lu -Tue Sep 8 15:26:10 2026 +Tue Sep 8 15:42:09 2026 Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition @@ -461,7 +461,7 @@ No non-DPA dedicated SERDES Receiver circuitry present in device or used in desi Info: ******************************************************************* Info: Running Quartus Prime Timing Analyzer Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition - Info: Processing started: Tue Sep 8 15:26:05 2026 + Info: Processing started: Tue Sep 8 15:42:03 2026 Info: Command: quartus_sta A1_Q2 -c lu Info: qsta_default_script.tcl version: #1 Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance. @@ -521,9 +521,9 @@ Info (332140): No Minimum Pulse Width paths to report Info (332102): Design is not fully constrained for setup requirements Info (332102): Design is not fully constrained for hold requirements Info: Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings - Info: Peak virtual memory: 738 megabytes - Info: Processing ended: Tue Sep 8 15:26:10 2026 - Info: Elapsed time: 00:00:05 - Info: Total CPU time (on all processors): 00:00:05 + Info: Peak virtual memory: 756 megabytes + Info: Processing ended: Tue Sep 8 15:42:09 2026 + Info: Elapsed time: 00:00:06 + Info: Total CPU time (on all processors): 00:00:06 diff --git a/Quartus/A1_Q2/simulation/questa/lu.svo b/Quartus/A1_Q2/simulation/questa/lu.svo index 89c2c94..205d5ea 100644 --- a/Quartus/A1_Q2/simulation/questa/lu.svo +++ b/Quartus/A1_Q2/simulation/questa/lu.svo @@ -17,7 +17,7 @@ // PROGRAM "Quartus Prime" // VERSION "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" -// DATE "09/08/2026 15:26:13" +// DATE "09/08/2026 15:42:11" // // Device: Altera 5CGXFC5C6F27C7 Package FBGA672 @@ -34,10 +34,10 @@ module lu ( A, B, Y); -input [1:0] op; -input [3:0] A; -input [3:0] B; -output [3:0] Y; +input logic [1:0] op ; +input logic [3:0] A ; +input logic [3:0] B ; +output logic [3:0] Y ; // Design Ports Information // Y[0] => Location: PIN_F7, I/O Standard: 2.5 V, Current Strength: Default diff --git a/Quartus/A1_Q3/asu.qws b/Quartus/A1_Q3/asu.qws index 47d9a93..30099c0 100644 Binary files a/Quartus/A1_Q3/asu.qws and b/Quartus/A1_Q3/asu.qws differ diff --git a/Quartus/A1_Q3/db/asu.db_info b/Quartus/A1_Q3/db/asu.db_info index dff2732..4686c8d 100644 --- a/Quartus/A1_Q3/db/asu.db_info +++ b/Quartus/A1_Q3/db/asu.db_info @@ -1,3 +1,3 @@ Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition Version_Index = 604268800 -Creation_Time = Fri Sep 4 13:02:46 2026 +Creation_Time = Tue Sep 8 15:43:22 2026 diff --git a/modules/asu.sv b/modules/asu.sv index eb4fd6f..3235233 100644 --- a/modules/asu.sv +++ b/modules/asu.sv @@ -1,8 +1,9 @@ -module asu #(width=8)(input logic [0:0] op, - input logic[width-1:0] A, input logic[width-1:0] B, - output logic[width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN); +module asu #(parameter width = 2)( + input logic [0:0] op, + input logic[2**width-1:0] A, input logic[2**width-1:0] B, + output logic[2**width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN); - logic [width-1:0] operand; + logic [2**width-1:0] operand; always_comb begin // A + (sub) ? B : -B // Adds an extra bit to all operands to calculate the carry bit. Not optimal for hardware synthesis diff --git a/modules/asu.sv.bak b/modules/asu.sv.bak new file mode 100644 index 0000000..eb4fd6f --- /dev/null +++ b/modules/asu.sv.bak @@ -0,0 +1,16 @@ +module asu #(width=8)(input logic [0:0] op, + input logic[width-1:0] A, input logic[width-1:0] B, + output logic[width-1:0] OUT_1, output logic[0:0] COUT, output logic[0:0] OUT_CIN); + + logic [width-1:0] operand; + always_comb begin + // A + (sub) ? B : -B + // Adds an extra bit to all operands to calculate the carry bit. Not optimal for hardware synthesis + operand = (B ^ {(width){op}}); + {COUT, OUT_1} = A + operand + {{(width-1){1'b0}}, op}; + end + + // Need to do this outside of the always_comb block because parameter-based bitslicing/indexing isn't supported? + // Cin for width-2'th bit to later be xor'ed with COUT to determine if a signed overflow occured for the MIPS architecture + assign OUT_CIN = A[width-1] ^ operand[width-1] ^ OUT_1[width-1]; +endmodule diff --git a/tests/lu_tb.sv b/tests/lu_tb.sv index 821081e..a5a21bb 100644 --- a/tests/lu_tb.sv +++ b/tests/lu_tb.sv @@ -1,13 +1,13 @@ `include "lu.sv" -module lu_tb #(W=8)(); +module lu_tb #(parameter W=4)(); logic [1:0] op; logic [W-1:0] A; logic [W-1:0] B; logic [W-1:0] C; logic [W-1:0] C_exp[16]; - lu #(W) dut(); + lu #(W/2) dut(); integer error_count; initial begin @@ -56,4 +56,4 @@ module lu_tb #(W=8)(); if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m"); else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count); end -endmodule \ No newline at end of file +endmodule diff --git a/tests/lu_tb.sv.bak b/tests/lu_tb.sv.bak new file mode 100644 index 0000000..5c3fa70 --- /dev/null +++ b/tests/lu_tb.sv.bak @@ -0,0 +1,59 @@ +`include "lu.sv" + +module lu_tb #(W=4)(); + logic [1:0] op; + logic [W-1:0] A; + logic [W-1:0] B; + logic [W-1:0] C; + logic [W-1:0] C_exp[16]; + + lu #(2) dut(); + + integer error_count; + initial begin + // AND + C_exp[0] = {W{1'b0}}; + C_exp[1] = {W{1'b0}}; + C_exp[2] = {W{1'b0}}; + C_exp[3] = {W{1'b0}}; + // OR + C_exp[4] = {W{1'b0}}; + C_exp[5] = {W{1'b1}}; + C_exp[6] = {W{1'b1}}; + C_exp[7] = {W{1'b1}}; + // XOR + C_exp[8] = {W{1'b0}}; + C_exp[9] = {W{1'b1}}; + C_exp[10] = {W{1'b1}}; + C_exp[11] = {W{1'b0}}; + // NOR + C_exp[12] = {W{1'b1}}; + C_exp[13] = {W{1'b0}}; + C_exp[14] = {W{1'b0}}; + C_exp[15] = {W{1'b0}}; + + error_count = 0; + op = 0; + A = 0; + B = 0; + $display("Beginning LU tests"); + for (integer N = 0; N < 4; ++N) begin + for (integer M = 0; M < 2; ++M) begin + for (integer K = 0; K < 2; ++K) begin + #1; + if (C != C_exp[N*2*2 + M*2 + K]) begin + $display("\t\x1b[38;5;9mOp 0b%b(0b%b, 0b%b) produced 0b%b but 0b%b was expected\x1b[m", op, A, B, C, C_exp[N*2*2 + M*2 + K]); + error_count = error_count + 1; + end + B = 1; + end + A = 1; + end + A = 0; + B = 0; + op = op + 1; + end + if (error_count == 0) $display("\x1b[38;5;10mAll LU tests passing\x1b[m"); + else $display("\x1b[38;5;9m%0d LU test(s) failing\x1b[m", error_count); + end +endmodule