0 Fork 0

T

Fixed printing annoyance. Added variable dumping to a wavefile. Updated delay to 2 units (as there is 1 unit of clk being high and 1 unit low).

Removed register initialisation code from testbench.
Fixed typo when wanting to check T0 (R8) but was checking R0.
Added explicit if-else begin-end blocks to logging and a simulation exit when the testbench is done.

2026-10-16 11:41:33 +11:00

asm

Fixed instruction width issue in ROM. Stripped all comments to form minimal HEX file to rule out possible parser issues.

2026-10-16 11:29:04 +11:00

ModelSim

Updated ModelSim Files

2026-09-16 10:15:08 +10:00

modules

Updated assignment 2 to reflect prior changes. Fixed instruction ordering for register file module (again). Fixed typo that limited the space the ALU could write its flags out to. Swapped ordering to be correct when determining if we are storing the result from ALU or MEM.

2026-10-16 11:38:35 +11:00

Quartus

Updated Assignment2 with better register file module insantiation

2026-10-15 15:07:41 +11:00

Submission

Added attribution to submission files

2026-09-16 13:35:35 +10:00

tests

Fixed printing annoyance. Added variable dumping to a wavefile. Updated delay to 2 units (as there is 1 unit of clk being high and 1 unit low).

2026-10-16 11:41:33 +11:00

.gitignore

Created general project structure. Only seven segment, logic unit and adder/subtractor modules and tests implemented

2026-09-03 15:25:07 +10:00

isv.py

Added python script for invoking icarus verilog. This script has three subcommands; submit, test_submit and test. test is equivalent to the run.bat shell script, submit generates a single-file verilog source suitable for submission. test_submit will run all generated submission testbenches to verify that nothing was broken.

2026-09-15 22:00:02 +10:00

README.md

Initial commit

2026-09-03 15:04:27 +10:00

run.bat

Fixed bug where includes still refered to verilog rather than systemverilog. Inverted test cases in seven segment test bench to reflect changes made to module. There is still a bug with the module where it outputs garbage

2026-09-03 16:32:56 +10:00

README.md

FPGA_Uni