{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1788927253447 ""} { "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1788927253447 ""} { "Info" "IMPP_MPP_USER_DEVICE" "asu 5CGXFC5C6F27C7 " "Selected device 5CGXFC5C6F27C7 for design \"asu\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1788927253452 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788927253522 ""} { "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1788927253522 ""} { "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1788927253934 ""} { "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1788927253961 ""} { "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1788927254010 ""} { "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_START_INFO" "" "Starting Fitter periphery placement operations" { } { } 0 184020 "Starting Fitter periphery placement operations" 0 0 "Fitter" 0 -1 1788927260724 ""} { "Info" "IFITCC_FITCC_FITTER_PERIPHERY_PLACEMENT_END_INFO" "00:00:00 " "Fitter periphery placement operations ending: elapsed time is 00:00:00" { } { } 0 184021 "Fitter periphery placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927260744 ""} { "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1788927260746 ""} { "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788927260746 ""} { "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1788927260746 ""} { "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1788927260746 ""} { "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1788927260747 ""} { "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1788927260747 ""} { "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1788927260747 ""} { "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1788927260747 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1788927260747 ""} { "Info" "IFSV_FITTER_PREPARATION_END" "00:00:06 " "Fitter preparation operations ending: elapsed time is 00:00:06" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927260764 ""} { "Critical Warning" "WSTA_SDC_NOT_FOUND" "asu.sdc " "Synopsys Design Constraints File file not found: 'asu.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1788927266566 ""} { "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1788927266566 ""} { "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1788927266567 ""} { "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1788927266567 ""} { "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1788927266568 ""} { "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1788927266568 ""} { "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1788927266569 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1788927266571 ""} { "Info" "IVPR20K_VPR_APL_ENABLED" "" "The Fitter is using Advanced Physical Optimization." { } { } 0 14951 "The Fitter is using Advanced Physical Optimization." 0 0 "Fitter" 0 -1 1788927266670 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:01 " "Fitter placement preparation operations ending: elapsed time is 00:00:01" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927267180 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1788927267673 ""} { "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1788927267909 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927267909 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1788927268856 ""} { "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X11_Y0 X22_Y11 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11" { } { { "loc" "" { Generic "/home/oliver/Documents/FPGA_Dev/FPGA_Uni/Quartus/A1_Q3/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X11_Y0 to location X22_Y11"} { { 12 { 0 ""} 11 0 12 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1788927274232 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1788927274232 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1788927274482 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1788927274482 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1788927274482 ""} { "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Fitter routing operations ending: elapsed time is 00:00:01" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927274485 ""} { "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.07 " "Total time spent on timing analysis during the Fitter is 0.07 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1788927275578 ""} { "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788927275619 ""} { "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788927275980 ""} { "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1788927275980 ""} { "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1788927276713 ""} { "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:04 " "Fitter post-fit operations ending: elapsed time is 00:00:04" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1788927279349 ""} { "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1788927279608 ""} { "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1383 " "Peak virtual memory: 1383 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788927280159 ""} { "Info" "IQEXE_END_BANNER_TIME" "Wed Sep 9 14:14:40 2026 " "Processing ended: Wed Sep 9 14:14:40 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788927280159 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:28 " "Elapsed time: 00:00:28" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788927280159 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:38 " "Total CPU time (on all processors): 00:00:38" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788927280159 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1788927280159 ""}