Including quartus prime lite edition project folders for flashing the project to the board
This commit is contained in:
TroubleElectrical committed
1 parent
a89a66d34d
commit
31a4496904
102 files changed
+4538
No files matched your search
@@ -0,0 +1,61 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1788416932830 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1788416932831 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Sep 3 16:28:52 2026 " "Processing started: Thu Sep 3 16:28:52 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1788416932831 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1788416932831 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta q1 -c seven_seg " "Command: quartus_sta q1 -c seven_seg" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1788416932831 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1788416932887 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1788416933360 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "2 2 " "Parallel compilation is enabled and will use 2 of the 2 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1788416933360 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416933434 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416933434 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "seven_seg.sdc " "Synopsys Design Constraints File file not found: 'seven_seg.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1788416934001 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416934001 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788416934002 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788416934002 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1788416934002 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788416934003 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1788416934003 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1788416934007 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 85C Model" { } { } 0 0 "Analyzing Slow 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788416934008 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934009 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934013 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934014 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934015 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934015 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416934016 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1100mV 0C Model" { } { } 0 0 "Analyzing Slow 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788416934018 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788416934056 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788416935348 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416935450 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788416935450 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788416935450 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788416935450 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935451 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935452 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935453 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935454 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935455 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416935455 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 85C Model" { } { } 0 0 "Analyzing Fast 1100mV 85C Model" 0 0 "Timing Analyzer" 0 0 1788416935457 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1788416935719 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1788416936416 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416936454 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788416936454 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788416936455 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788416936455 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936456 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936457 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936458 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936459 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936459 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1100mV 0C Model" { } { } 0 0 "Analyzing Fast 1100mV 0C Model" 0 0 "Timing Analyzer" 0 0 1788416936461 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1788416936612 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1788416936612 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1788416936613 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1788416936613 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936614 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936615 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936616 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936617 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1788416936617 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788416938015 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1788416938016 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "792 " "Peak virtual memory: 792 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1788416938038 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Sep 3 16:28:58 2026 " "Processing ended: Thu Sep 3 16:28:58 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1788416938038 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Elapsed time: 00:00:06" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1788416938038 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1788416938038 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1788416938038 ""}
|
||||
Reference in new issue
Block a user